Display Setting; Anti-Theft System - Panasonic CQ-DFX883N Operating Instructions Manual

Display Setting

Adjustment to display on the picture menu
CQ-DFX883N
TA
Spectrum analyzer setting
Contrast adjustment (Setting range: 1 to 5, Default: Contrast 3)
Display setting
If the display adversely affects your
driving in a dark place, for exam-
ple, you can turn it off completely.
Note: Even when switching the display off, pressing any button causes the display acti-
vated for 5 seconds.
26
CQ-DFX883N
(PICTURE menu)
1
Press (MENU) to display the menu dis-
play.
For using the remote control, hold down
2 sec. or more.
2
Press (]) or ([) to display the PIC-
TURE menu.
OPEN
3
Press (}) or
a function to be adjusted.
4
Press (SET) to confirm the function.
5
Press (}) or
the setting value.
6
Press (SET).
7
Press (MENU) to confirm the adjust-
ment.
For using the remote control, hold down
2 sec. or more.
: Pattern 1 (Default)
: Pattern 5
: Off
: Tilting down view angle
: Tilting up view angle
: Regular display (Default)
: Switching the display off

Anti-Theft System

This unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable. The security indi-
cator will blink.
Remove the removable face plate
q Switch off the power of the unit.
MENU
(MENU) for
SEL
w Press
(OPEN). The removable face plate will be
OPEN
opened.
e Push the face plate to either the right or left.
r Pull it out toward you.
t Gently press the bottom of the case and open the cover.
Place the face plate into the case and take it with you when
({) to select
you leave the car.
({) to adjust
MENU
Install Removable Face Plate
(MENU) for
SEL
q Fit the face plate with its right or left hole on one of the
pins provided on the main unit.
w Fit the other hold on the other pin applying slight pressure.
e Move the face plate up and down a few times to make sure
it is secure. Then close the front panel and press down the
right side of the face plate until it clicks into plate.
Security Functions
Following functions are activated when the Security Function
is ON. (a Page 25)
Security indicator
It blinks when the removable face plate is removed from
the unit.
Panel Removal Alarm
It sounds to warn you not to forget to remove the panel
before leaving your car.
Security message
Also message is displayed.
Cautions:
¡This face plate is not waterproof. Do not expose it to water or excessive moisture.
¡Do not remove the face plate while driving your car.
¡Do not place the face plate on the dashboard or nearby areas where the temperature rises to high levels.
¡Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical contacts.
¡If dirt or other foreign substances get on the contacts, wipe them off with clean and dry cloth.
¡To avoid damaging the front panel, do not push it down or place objects on it while it is open.
1
Open
Contact
3
Pull out
2 Push
Removable Face Plate Case
Contact
3
2
1
Security Indicator
(Security message display)
CQ-DFX883N