Hyundai ADB40F2AN User Manual page 120

Problem Possible Cause
The fuse is
disconnected
The power
does not turn
on
Device is not properly
connected
The system
The vehicle battery is
does not
low
play
Countermeasure
• Replace with a suitable fuse
• If the fuse is disconnected
again, please contact
your point of purchase or
Hyundai dealer
• Check to see that the device
has been properly con-
nected
• Charge the battery If the
problem persists, contact
your point of purchase or
Hyundai dealer
Problem Possible Cause
• The brightness, satura-
The image
tion, hue, and contrast
color/tone
levels are not set prop-
quality is low
erly
• The volume level
is set to the lowest
level
• The connection is
Sound does not proper
• The device is
not work
currently fast-for-
warding, rewinding,
scanning, or playing
in slow mode
• Vibration is occur-
ring from where the
The sound or
conversion switch
image quality
has been installed
is low
• Image color/tone
quality is low
Countermeasure
• Properly adjust the bright-
ness, saturation, hue, and
contrast levels through
Display Setup
• Adjust the volume level
• Check to see that the device
has been properly connected
• The sound will not work
when the device is fast-for-
warding, rewinding, scan-
ning, or playing in slow
mode
• The sound may be short-cir-
cuited and the image dis-
torted if the device vibrates
• The device will return to nor-
mal once vibrations stop
Appendix I 9-5