Table of Contents
Advertisement
10. Maintenance & Troubleshooting
10.1 Maintenance
Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for
routine exterior cleaning. Never use benzine or other solvents.
10.2 Troubleshooting
Direct access channel 184 is provided by Sirius Satellite Radio to confirm proper installation of all the
system components.
If the receiver acquires channel 184, the system is installed / working properly. If all components are
working as described in this manual, however you are experiencing difficulty with programming reception,
contact the Sirius Technical assistance phone number 1-888-539-SIRIUS (7474).
If the receiver does not acquire channel 184 properly, please reconfirm proper installation and setup per
the instructions included in this manual.
After verifying proper installation and setup you are still experiencing trouble, check the following items:
1. KEYPAD ERROR
When the SSR system starts, if the CDU never detects that all of the keys are released at the same time, a
"KEYPAD ERROR" message is displayed (the CDU has determined that a key is stuck in the pressed state).
Action: Check CDU for a key which is stuck down.
2. INITIALIZING
If the CDU cannot communicate with the receiver at startup, INITIALIZING is displayed. This may be tem-
porarily displayed if the user presses a key during the "SIRIUS SATELLITE RADIO" scrolling, and is not
necessarily a problem.
Action: If the message does not go away after approx. 6 seconds, check the electrical harness to the
receiver.
47
CR-SRF100/CR-SRT100
Advertisement
Table of Contents
