CR-W402U CR-W402U • Please read these instructions carefully before using this product and keep this manual for future reference. Heavy Duty Weather Band Receiver Operating Instructions POWER POWER BAND BAND TUNE TUNE SEEK SEEK CR-W402U...
For maximum safety, have it installed by the completed. shop where you purchased it. Panasonic is not liable for any ❑ Do not connect more than one speaker to one set of problems resulting from your own installation of the unit.
Power and Sound Controls CR-W402U CR-W402U SQ (Sound Quality) SQ is a function that can call up various sound types at the touch of button in accordance with your listening music type. Press [SQ] for more than 2 seconds to select the sound type as follows: (FLAT) flat frequency response: does not emphasize any part.
Selecting the Clock Display Press [DISP] to change the display. Radio mode display (default) Clock display The 12-hour system is used for the clock. CR-W402U CR-W402U [{ TUNE], [} TUNE] Initial Time q Press [DISP] (CLOCK). w Hold down [DISP] (CLOCK) for more than 2 seconds.
Band Press [BAND](APM) to select a desired band. (➡ page 9) CR-W402U CR-W402U Preset buttons from [1] to [6] Auto Preset Memory (APM) Press and hold [BAND] (APM: auto preset memory) for more than 2 seconds.
Connect the speaker wires to the correct ones. listening. Product Servicing If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized Panasonic Servicenter. The product should be serviced only by a qualified technician. CR-W402U...
• Do not connect more than one speaker to one set of speaker • Warranty Card…Fill this out promptly. leads. • Panasonic Servicenter List for Service Directory WARNING …Keep for future reference in case the product needs servicing. • Installation Hardware…Needed for in-dash installation.
Page 9
The dashboard should be 3/16” (4.75 mm) – 7/32” (5.56 mm) thick in order to be able to support the unit. CR-W402U Cautions: • We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
• Remember, if your vehicle has a drive computer or a navigation computer, the data of its memory maybe erased when the battery terminals are disconnected. Fuse (15 A) Refer fuse replacement to your nearest authorized Panasonic Servicenter. Do not try fuse replacement by yourself.
Usable sensitivity: 3 dB/µV (S/N 20 dB) Signal/Noise Ratio (40 dB/µV): 50 dB Above specifications comply with EIA standards. Note: Specifications and the design are subject to modification without notice due to improvements in technology. CR-W402U MEMO 150 mm) CR-W402U...
Page 13
Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094 http://www.panasonic.com YFM284C538CA PTW1205-0 Printed in China (Y)