This manual is intended to help you become familiar with the functions of MIDIPLUS PianoEngine. Please read the manual carefully to understand all the features of your PianoEngine. At the end of this manual, you will see a list of 100 realized drums. What’s in the Box? PianoEngine –...
No matter connect with MIDI or USB, zero latency. Unique USB HOST design, you can abandon too many MIDI cables and directly connect to the PianoEngine with a USB cable for MIDI data exchange. Support USB HOST and MIDI IN at the same time. One playing piano accompaniment, one playing piano melody, you can form a small band anytime, anywhere.
2.13 You can charge your PianoEngine with Micro-USB to any device with a USB port (computer, power bank, etc.). 2.14 Port: 3.5mm TS Audio input port, 3.5mm TS headphone output port, MIDI IN/ OUT port, USB HOST port, Micro-USB charging &...
Page 6
Save: Press [Save] button, light up, after 2 seconds, the light is off, the current parameter is saved to the current preset combination (A/B/C), and the display shows the save status. 3.10 Shift: MIDIPLUS Co, Ltd.
Page 7
Note: When you want to restore the preset combination to the factory settings, just press and hold the [Set] button before powering on the PianoEngine, and then turn it on again. MIDIPLUS Co, Ltd.
Page 8
3.15 Power supply/charging: Micro-USB port provides power supply and charge. 3.16 Power switch: Press and hold for 3 seconds to turn on or off; in the power-on state, short press the switch, PianoEngine will send data to eliminate all sounds.
Ch4. Instructions 4.1 The sound effect of PianoEngine can be adjusted by pressing the buttons and rotating the wheel. Press the function button, button light up, and the display shows the current value. Use the rotating wheel to change the effect you want.
Page 10
Ch5. Sound List and Drum List MIDI Sound List MIDIPLUS Co, Ltd.
Need help?
Do you have a question about the PianoEngine and is the answer not in the manual?
Questions and answers