Mounting The Wall Bracket; Charging And Storage - Pro-Aqua Homewing Instructions For Use Manual

MOUNTING THE WALL BRACKET

CHARGING AND STORAGE

30
1. Make sure that there are no lines (water, gas or air), power
cables, wires or tubes directly behind the selected location
for the charging cradle.
2. Fix the wall bracket to the wall at the openings provided
using the screws and dowels supplied.
3. The charging cradle must be installed in accordance with
the statutory requirements and provisions. We recom-
mend wearing protective clothing and eye protection
during mounting.
4. Place the device in the charging cradle.
5. Connect the device in the charging station to an electri-
cal outlet. The battery must be fully charged (for approx.
4 hours) before you use the device for the first time.
1. The device switches off automatically when the battery
level is below 10%.
2. The device will automatically shut down when the bat-
tery temperature drops below 3 °C, in order to protect
the motor and battery. Do not store the device in a
room with a temperature below 3 °C after charging.
3. To preserve battery longevity, do not recharge the
battery immediately after it has been completely di-
scharged. Allow the battery to cool for several minutes
before recharging.
4. The battery should not lie flat on a surface, since this
provides better cooling and thus a longer runtime and
battery life.