Channel/Clock Settings When Tv Guide On Screen; Tm System Is Not Used; Auto Channel/Clock Settings - Panasonic SC-HT1500 Operating Manual

Tabs
Audio Speaker
Set the delay time for your center and surround speakers
Continued
L
C
a
c
b
RS
LS
Display Status Messages
Choose whether to show status messages automatically.
On-screen Language
Choose the language for these menus and on-screen
messages.
Blue Background
Select "Off" if you do not want to have the unit show the blue
background when reception is weak.
Front Display
Changes the brightness of the unit's display.
TV TV Type (➡ page 8)
Screen
4:3 TV Settings for DVD-Video
Select how DVD-Video widescreen picture is shown on a 4:3
standard aspect television.
4:3 TV Settings for DVD-RAM
Select how DVD-RAM widescreen picture is shown on a 4:3
standard aspect television.

Channel/Clock settings when TV Guide On Screen

Refer to the control reference on page 39.
Preparation:
If the television program list has already been downloaded, return the
unit to the factory preset condition using the steps indicated below.
When the unit is on and stopped
1 Press and hold [X CH] and [W CH] on the main unit for about
five seconds.
The unit turns off.

Auto channel/clock settings

1
Press [FUNCTIONS].
2
Press [3, 4] to select "SETUP" and press [ENTER].
3
Press [3, 4] to select "Channel" and press [1].
4
Press [3, 4] to select "Auto Channel
Setting" and press [ENTER].
5
Press [2, 1] to select "Yes" and press [ENTER].
6
Press [ENTER].
Auto Channel Setting starts.
This takes a few minutes.
The unit then proceeds with
Auto Clock Setting. The time is
displayed when finished.
≥DST, Daylight Saving Time, shows the summertime setting.
≥TIME ZONE shows the time difference from Greenwich
meantime (GMT).
Menus
Values
If distance a or b is greater than or equal to distance c, set to "0".
R
If distance a or b is less than distance c, set as follows.
SW
a Center speaker
Difference
Approx. 30 cm (1 foot)
Approx. 60 cm (2 feet)
Approx. 90 cm (3 feet)
Approx. 120 cm (4 feet)
Approx. 150 cm (5 feet)
≥When you change the surround speaker setting for Dolby Digital, the setting also changes for Dolby Pro Logic II.
SETUP Auto Clock Setting
Auto Clock Setting is complete.
Channel
Set Up
4/4/2002 12:15 AM
Disc DST............. ON
TIME ZONE.... CST
Video
Audio
Options (Underlined items are the factory presets.)
Multi Channel
Center: 0.0/1.0/2.0/3.0/4.0/5.0 ms
Surround (L/R): 0.0/5.0/10.0/15.0 ms
b Surround speakers
Setting
Difference
1.0 ms Approx. 150 cm (5 feet)
2.0 ms
Approx. 300 cm (10 feet)
3.0 ms Approx. 450 cm (15 feet)
4.0 ms
5.0 ms
≥Automatic ≥Off
≥English ≥Español
–Only English is displayed in the TV Guide On Screen
regardless of the settings. Other languages cannot be displayed.
≥On ≥Off
≥Bright ≥Dim
≥Automatic:
The display turns dark during play, and reappears
momentarily if a button is pressed. When the unit is turned off
all displays disappear. While using this mode the standby
power consumption can be reduced.
≥Aspect 4:3 & 480I
≥Aspect 16:9 & 480I
≥Pan & Scan:
Video recorded for a widescreen is played as Pan & Scan
(unless prohibited by the producer of the disc).
≥Letterbox:
Video recorded for a widescreen is played in the letterbox style.
≥4:3:
Titles played as recorded.
≥Pan & Scan: Video recorded for a widescreen is played as Pan & Scan.
≥Letterbox:
Video recorded for a widescreen is played in the letterbox style.
TM
system is not used
2 Press [Í POWER] to turn the unit on.
3 Complete the TV Guide On Screen
is pressed after the "Watch TV" message screen is displayed).
[Note]
You can set timer recording only manually after you set the unit with
"Auto Channel Setting".
EST (Eastern Standard Time) l GMT j5
CST (Central Standard Time)
MST (Mountain Standard Time) l GMT j7
PST (Pacific Standard Time)
AST (Alaska Standard Time)
HST (Hawaii Standard Time)
For other areas: xx hr
≥If the Auto Clock Setting does not start automatically, select
"Auto Clock Setting" from the "Set Up" tab.
≥If the time was not set correctly, use manual clock setting
(➡ page 7) or time zone adjust.
7
Press [ENTER].
≥The unit configures channels according to the Antenna
System settings as follows.
Antenna system
VHF
TV
UHF
VHF
CATV LOW BAND
CATV MID/SUPER BAND
CATV CATV HYPER BAND
ULTRA BAND
SPECIAL CATV CHANNEL
Setting
5.0 ms
10.0 ms
15.0 ms
≥Français
TM system
≥Aspect 4:3 & 480P
≥Aspect 16:9 & 480P
TM
system setup (until [ENTER]
l GMT j6
l GMT j8
l GMT j9
l GMT j10
Band Channel
2–13
14–69
2–13
95–99
14–36
37–65
66–94
100–125
1
RQT7619
41