Sunnydaze Decor GSI-781 Quick Start Manual

OUTDOOR WATER FOUNTAIN AND LED LIGHTS
Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
I
H
G
F
E
C
B
A
Note: When first used, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to flow.
PQ1009
Purchase Date: /
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof
of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality control. Register your warranty at
www.serenityhealth.com/warranty/
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
customerservice@serenityhealth.com, or via our contact us page at
4 - TIER EGGSHELL
GSI-781
Select a smooth, level surface to place the fountain.
No.
A
B
C
D
E
F
G
H
I
NOTE:
CONNECT the water tube; detaching the water tube from the topper will damage the
fountain and void the product warranty.
ASSEMBLY
1. Place Large Tier (B) onto Pedestal (A), twist the large tier to
D
2. Place the Electric Submersible Pump (C) into Large Tier (B).
3. Connect LED Lights (D) to the Electric Submersible Pump
4. Run the built-in water tube in Topper (I) through Small Tier (H)
5. Connect Medium Column (G) to Small Tier (H), twist to lock.
6. Connect Medium Tier (F) to Medium Column (G), twist to lock.
7. Connect Large Column (E) to Medium Tier (F), twist to lock.
8. Ensuring the light cords are safely within the groove on the
CONNECT
9. Fill all tiers of the fountain with enough water to keep the pump
10. Plug the power cord into a properly grounded GFCI outlet.
01/2020
/ Order/Customer Reference Number:
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Parts
Pedestal
Large Tier
Electric Submersible Pump
LED Lights
Large Column
Medium Tier
Medium Column
Small Tier
Topper
The water tubing is built into the topper. Take care when handling
lock it onto the pedestal.
Run the power cord down tube of the large tier, through the
pedestal and under the groove in the backside of the pedestal.
Firmly connect the AC Adapter.
(C) and place the lights in the clips in Large Tier (B).
and twist to lock pieces together.
bottom of the large column, place the assembled tiers onto
Large Tier (B), twist to lock.
fully submerged during operation.
www.SerenityHealth.com/contact-us/
2-PERSON
ASSEMBLY
RECOMMENDED
Qty.
1
1
1
1
1
1
1
1
1
Page 1 / 2