Basic Connection; Connecting To A Television And A Set Top Box - Panasonic DMR-EA38VK Operating Instructions Manual

Basic Connection

Connecting to a Television and a Set Top Box

 Consult your set top box provider about the appropriate set top box to use.
 Additional coaxial cable and audio/video (AV) cable are required.
Note: The terminals on the rear of your TV and set top box may not appear as shown
below. Please read terminal labels carefully to ensure correct connections.
To a household AC
outlet
(AC 120 V, 60 Hz)
step
7
Rear of this unit
AC IN
step
The Set Top Box Control cable
6
is necessary for operating a set
top box with this unit's remote
control.
Place the Set Top Box Control
cable in front of the signal
sensor of the set top box.
Read the set top box operating
instructions regarding positioning
of the signal sensor.
If necessary, use the double sided
adhesive tape (included) to secure the Set
Top Box Control cable to a fl at surface.
 75  coaxial cable from the wall or satellite antenna to the "RF IN" or "SATELLITE IN" on
the set top box.
 75  coaxial cable from the "RF OUT" on the set top box to the "VHF/UHF RF IN" on the
TV.
 Audio/video cable (included) from the "DVD/VHS COMMON OUT" on the unit to the "AV
IN" on the TV.
 Audio/video cable from the "AV OUT" on the set top box to the "IN1" on the unit.
 Connect the Set Top Box Control cable (included) to the back of this unit.
 Install the Set Top Box Control cable (included) in front of the set top box.
 AC power supply cord (included) from the "AC IN" on the unit to a household AC outlet.
8
RQT9058
AUDIO IN VIDEO
IN
R L
Red White Yellow
step
3
Red White Yellow
DVD/VHS COMMON OUT
R-AUDIO-L VIDEO
DVD/VHS COMMON OUT
R-AUDIO-L VIDEO
AV OUT
SET TOP BOX
R-AUDIO -L VIDEO
SET TOP BOX
CONTROL
R-AUDIO -L VIDEO
CONTROL
IN1
IN1
Red White Yellow
step
step
4
5
Red White Yellow
AUDIO OUT VIDEO
OUT
R L
VHF/UHF
RF IN
Rear of TV
COMPONENT VIDEO OUT
S VIDEO
P P
B R
S VIDEO
OPTICAL
R-AUDIO-L O VIDEO
DIGITAL AUDIO OUT
DVD PRIORITY OUT ( (PCM/BITSTREAM) )
Cable from the wall
or satellite antenna
step
1
RF OUT
RF IN/
SATELLITE IN
Rear of set top box
step
2