Quick View (Play 1.3); Slow-Motion Play; Frame-By-Frame Viewing; Time Slip - Panasonic DMR-EA38VK Operating Instructions Manual

Quick View (Play 1.3)
[RAM]
Allows you to increase the play speed slightly without
distorting the audio.
During playback
PLAY
(Press and hold.)
– Press again to return to normal speed.

Slow-motion Play

[RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R]DL] [+RW]
[DVD-V] [-RW‹VR›]
While paused
or
– There are 5 slow-motion speeds. Each press
increases the speed.
– Press [ PLAY] to restart normal playback.
Notes
If continued for approx. 5 minutes, slow-motion play pauses
automatically (except [DVD-V]).

Frame-by-Frame Viewing

[RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R]DL] [+RW]
[DVD-V] [-RW‹VR›]
While paused
OK
– Each press shows the next or previous frame.
– Press and hold to advance or reverse frame-by-
frame in succession.
– Press [ PLAY] to restart normal playback.

Time Slip

[RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›]
Use to skip in 1-minute or 10-minute increments.
During playback
TIME SLIP
,  to select the time, then
OK
– Each press of  or  advances the interval
by 1 minute (press and hold for 10-minute
intervals).

CM Skip

[RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›]
Skips 1-minute forward with each press.
During playback
CM SKIP

Create Chapters

[RAM]
During playback
CREATE
CHAPTER
Tips
You can skip to the start of a chapter by pressing [, ].
Tips
Depending on the disc, some operations may not be possible.

Changing Audio during Playback

AUDIO
A to select the audio.
Available audio will differ based on disc type.
See below.
[RAM] [-RW‹VR›]
Stereo  Mono L  Mono R

[RAM] [-RW‹VR›] When playing a multilingual broadcast,
you can choose between Main Audio and SAP Audio.
Main Audio  SAP Audio
[DVD-V\
This allows you to change items like the audio channel
number and the soundtrack language (
Soundtrack
1 ENG
e.g., English is the selected language.
Notes
If you cannot change the audio type when you have used only
an optical digital audio cable for connection, set "Dolby Digital" to
"PCM" ( 56). Alternatively, you may connect to an amplifi er or
system component with an audio cable and change the input on the
amplifi er or system component to suit the connection (
e.g.: [RAM]
DVD-RAM
Play
"Stereo" is
selected.
Stereo
50).
65).
29
RQT9058