Setting The Set Top Box Control And Clock - Panasonic DMR-EA38VK Operating Instructions Manual

Setting the Set Top Box Control and Clock

Preparation:
 Turn on the television and select the appropriate
video input to suit the connections to the unit
(example: AV input, etc.).
 When using the set top box, make sure it is turned
on.
 These are the first settings you make upon buying
the unit. You don't need to make these settings again.
to turn the unit on.
DVD/VHS
POWER
"HELLO" appears on the unit's display.
When this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 3 via an HDMI cable (
acquires the setting information from the TV.
When the Quick Start Setting screen appears (
Step 4)
Language:
,  to select, then
When the Quick Start Setting screen
appears after this step (
TV Aspect Ratio:
,  to select "4:3 TV" or "16:9
Widescreen TV", then
 When connecting to a 4:3 standard aspect TV:
Select "4:3 TV".
 When connecting to a 16:9 widescreen TV:
Select "16:9 Widescreen TV".
Quick Start Function:
,  to select "On" or "Off",
then
OK
Set Top Box Control Settings:
,  to select "Yes",
then
OK
 If you do not control your set top box with this unit:
Select "No".
The unit then displays "Set Clock Manually" screen (
10).
10
RQT9058
Select Language
Seleccione el idioma
Sélection de langue
OK
below, Step 4)
Press OK
Pulse OK
Appuyer sur OK
Aspect Ratio Selection
Select TV type and press OK.
(Please refer to Operation Instruction
for details)
OK
16:9 Widescreen TV
Quick Start Setting
The unit can be turned on faster, in about
1 second. Please note that Quick Start
mode slightly increases power
consumption when the unit is off.
(See Operation Instructions for details)
Turn Quick Start on ?
STB (Set Top Box) IR Settings
This unit can control your STB
(Set Top Box ) , when connected to IN1
input using the Set Top Box Control cable.
Start setup now?
9), it
below,
English
Español
Français
4:3 TV
 "Quick Start" function (
If you set Quick Start to on, you
can start recording to DVD-RAM
about 1 second after you press
[ DVD/VHS POWER] to turn the
unit on and then sequentially press
[ REC].
The following happens when you have
On
selected "On".
Off
– Power consumption in standby mode
increases because power is supplied
to the unit.
To view programs from the set top
box.
 If the TV is not directly connected to
the set top box, then turn on this unit
Yes
in the following cases:
No
–"Quick Start" is "Off"
– "Quick Start" is "On" with this unit
being connected to the TV via a
component or HDMI cable.
12, Step
 To zoom in on video
1. Press [SUB MENU].
2. Press [,] to select "Zoom In",
then press [OK].
To return to the previous screen
Press [RETURN].
DVD/VHS
POWER
POWER
VOL
DRIVE
CH
TV/VIDEO
SELECT
TRACKING/V-LOCK
1 2 3
CH
4 5 6
INPUT SELECT
9
7 8
DELETE
0
CANCEL
RESET SLOW/SEARCH
SKIP/INDEX REW FF
STOP PAUSE PLAY
CM SKIP
TIME SLIP / JET REW
OK
SUB MENU RETURN
CREATE
AUDIO DISPLAY
SETUP
CHAPTER
A B
Tips
53)