Advanced Video Cassette Playback; Zoom In On Video; Fast-Forward/Rewind; Slow Playback - Panasonic DMR-EA38VK Operating Instructions Manual

Advanced Video Cassette Playback

Zoom in on video

During playback
SUB MENU
To zoom in:
,  to select "Zoom In", then
OK
Tips
To return the picture to its original size
Press [, ] to select "Zoom out" in step 2, then press [OK].

Fast-forward/Rewind

With the unit stopped
to fast-forward the tape.
FF
to rewind the tape.
REW

Slow playback

During playback
PAUSE
Press and hold for about
2 seconds.
– Press [ PLAY] to restart normal playback.
Notes
Slow playback is automatically canceled after 10 minutes.

Cue/Review

Allows to quickly review a portion of the video just
played, or cue later portions of the tape.
During playback
to cue later portions of the tape.
FF
to review portion just played.
REW
– Press [ PLAY] to restart normal playback.
Notes
Cue/review is automatically canceled after 10 minutes.
34
RQT9058
Tips
For quicker operation
 Hold [, ] to start cue/review and release the button to
restart normal playback.

Jet Search

Allows high speed search of video in forward or reverse
direction.
During playback
twice to Jet Search forward.
FF
twice to Jet Search in reverse.
REW
– Press [ PLAY] to restart normal playback.
Notes
 The speed of Jet Search (27 or 35) can be specifi ed via the
Setup menu ( 60).
 Recordings made in EP or VP mode may experience distortions or
vertical scroll at 35 times speed. If so, change speed to 27 times.
 Depending on your TV, the picture may not be in color or may be
distorted.
 Jet Search is automatically canceled after 10 minutes.

Jet Rewind

Video tapes will rewind to the beginning of the tape at
higher-speed.
TIME SLIP / JET REW
Notes
 Depending on the tape or an operating condition, the rewind
speed may change somewhat.
 The tape counter is reset to "0:00.00" when the tape is rewound to
the beginning.
 Depending on the tape, this function may not work.

VHS Index Search System (VISS)

The unit automatically records special index signals on a
tape every time a recording is started (via [ REC], or a
scheduled recording). The index search function makes
use of these index signals to help you fi nd the beginning
of a desired program quickly and easily.
While stopped or during normal play
or .
– Each press increases the number of skips.
– Press [ STOP] to cancel the search.
Notes
 Up to 20 index signals can be searched in either direction.
 If you overshoot in either direction, press the opposite button to
correct.
 For correct operation, make recordings of at least 5 minutes to
ensure that index signals are not spaced too closely together.