ELMECO First Class FC1 Manual
Hide thumbs Also See for First Class FC1:

Advertisement

A quality
choice
12
You have
demonstrated your
sensitivity towards
innovation by
having chosen
Elmeco and,
especially, First
Class, the new, and
presently the only,
multifunctional
machine with a
double auger
system. We
therefore thank you
for having
understood the
importance of
working with a
company that
believes that the
word "quality" is
not an abstract
term.
All of us at Elmeco
know that quality
demands concrete
effort. It means
repeating the
innovative
distinctive qualities
that have set us
apart in the past as
inventors of the
first machine for
slush and that
today reassert us as
the leader in
groundbreaking
techniques and
technology.
It means operating
with the goal in
mind to
continuously
improve our
organization and
management,
according to the
ISO 9001.
It means placing
the customer at the
center of attention
and dedicating
investments and
resources to satisfy
his needs
continuously.
On the other hand,
to you, having
chosen the Elmeco
quality means
being able to
operate with
reliable and lasting
products, being
able to count on
timely and qualified
assistance, and
being able to always
work better with
greater profits.
Yes, because the
Elmeco quality
reflects the quality
of your work.
UNI EN ISO 9001
CERTIFICATE No.
9130 . ELM 9
ISO 9001
QUALITY CERTIFICATION

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the First Class FC1 and is the answer not in the manual?

Questions and answers

Summary of Contents for ELMECO First Class FC1

  • Page 1 UNI EN ISO 9001 CERTIFICATE No. All of us at Elmeco timely and qualified 9130 . ELM 9 know that quality assistance, and demands concrete being able to always effort.
  • Page 2 The First Class furnishings with care for your own Disconnect the equipment General have been studied down to purposes and for future from the electrical source instructions the last details, hence the owners of the machine, as during maintenance, luminous display on the well.
  • Page 3: New Machine

    Installing the This model for making Once you have removed the Warning grated ice-drinks, sherbets packaging, check for any new machine and cold drinks guarantees a missing pieces. This machine must be used completely homogenous No packaging materials only for the purposes for product with the ability to (plastic bags, polystyrene which it has been designed.
  • Page 4 Controls Top Light can activate the electronic connector is activated; this can bypass function tender Switching On/Off be used to control a remote and signals Adjusting the intensity pressed the key selection alarm and/or a refilling «» slush-juice till augers system.
  • Page 5: Maintenance

    Cleaning Cleaning is fundamental Raise the Warning: it is also necessary to the machine life and container. to always keep the condenser conservation, therefore, it coil clean (fig. ) using a is wise to periodically • Unscrew the ring nut soft bristle paint brush maintenance clean the parts in contact...
  • Page 6: Defrost Timer

    How to begin Refer to the panel “Control • If you wish to increase the The amount is usually and signals” of pag. 4. consistency of the slush or recommended in the producing cold drink, press the keys producer’s user •...
  • Page 7: Technical Assistance

    Machines that are no longer Disposal of being used must be made non operative. the old Disconnect the plug from the electrical source and cut the machine feeding cable. Environmental instructions The refrigerating units must be disposed of through authorized city or private disposal facilities.
  • Page 8 Electric Only if there is P1-2-3 compressor timer Fan motor Level probe System Only for FC2 and R1-2-3 Transformer Heating element 100Kohm-0.25W A) Only voltage Fuse 5x20 (2A-20VA/5A- 220/240V - 50 Hz 60VA) Suppressor filter q1-2-3 Fuse 5x20 mm F315mA Thermostat EV1-2-3 Main switch...
  • Page 9: Refrigerating System

    Refrigerating Compressor Cn Condenser System Dryer filter B Accumulator ev1 Solenoid valve ev2 Solenoid valve ev3 Solenoid valve E1 Evaporator E2 Evaporator E3 Evaporator Discharge line Liquid line Suction line Pr Pressure switch...
  • Page 10 CODE DESCRIPTION M0004109-001 RING NUT HORIZONTAL AUGER M0003126-001 RING NUT LEVER COVER WITH PISTON M0003104 HANDLE M0003108 HANDLE COVER M0003124-001 PIN DRAIN LEVER OR13000117 O-RING M0003121-001 PISTON WITH AXE AND GASKET 8 PERNO3X28ACCIAI DOWEL D 3X28MM M0003117-001 OUTLET GASKET M0003106-001 PISTON SPRING M0003120-001 RING NUT LEVER COVER...
  • Page 11 Spare parts • Electric System one not indicated • Electric System two tubs in the • Electric System three enlarged tubs drawings • Compressor 220/240V two and three tubs • Compressor 115V two and three tubs • Compressor 220/240V one tub •...

Table of Contents