Yamato 99452 Instruction Manual page 7

Changing the rotating direction by switching the direction lever near the trigger to your
desired direction. Forward, which is marked with an "F", means clockwise direction and
reverse, which is marked "R", indicates the counterclockwise direction. Before start
operating this tool, please make sure the rotating direction.
• If the drill bit penetrates the work piece, keep the tool running makes it easier to remove
this tool from workpiece.
• Always disconnect air supply when changing drill bits
• Release trigger to stop the tool
• When job is completed, turn off the air compressor and store the air tool after lubrication.
Please see at your local governal disposal for waste regulation
SPECIFICATIONS
COD. 99452 –
Free Speed @90 PSI
Maximum Working Pressure
Air Inlet
Recommended Hose Size
Chuck Size
Spindle Thread
Average Air consumption
Weight
Length
A weighted sound pressure level
Sound power level
Vibration in the handle
Free Speed @90 PSI
Maximum Working Pressure
Air Inlet
Recommended Hose Size
Chuck Size
Spindle Thread
Average Air consumption
Weight
Length
A weighted sound pressure level
Sound power level
Vibration in the handle
(RP7110)
COD. 99453 -
(RP7101)
(Mod. non reversible)
(Mod. reversibile)
7
1800 RPM
90 PSI/6,3 BAR
1/4"
3/8"
3/8"
3/8 - 24
114 l/min
1.1 Kg.
170 mm
87,1dB(A)
98,1 dB(A)
0,96 m/s2
1800 RPM
90 PSI/6,3 BAR
1/4"
3/8"
3/8"
3/8 - 24
106 l/min
1,1 Kg
170 mm
87,1dB(A)
98,1 dB(A)
0,96 m/s2