Connecting The Antenna / Cable To The Rf In Terminal (Vcr) - Panasonic PT-50LC13 Operating Instructions Manual

Installation
Connecting the Antenna / Cable to the RF in Ter mi nal (VCR)
Use this confi guration when connecting the projection display to a cable TV system using VCR.
In from cable
Note:
When the RF coaxial cable is connected to the projection display VHF/UHF terminal via a cable box or VCR, set the TV channel to
CH3 or CH4. This does not apply when signal is input from VIDEO INPUT.
14
TERMINAL ON
THE BACK OF
THE CABLE BOX
CABLE BOX
For assistance, please call : 1-888-VIEW PTV(843-9788)
Connect the cable from the Output
terminal on the back of the Cable Box
or antenna/cable system to the Antenna
input terminal on the back of the VCR.
VCR
Or
↑
TO VCR
↑
TO VCR
Incoming Cable
from Antenna or
Cable TV System