Table of Contents
Advertisement
1.4.5 Document use / request to the reader
1.4.6 Important notes
Field of use
Proper use
Electrical installation
Operation
Wiring
Storage and transport
Maintenance
Faults
Disposal
A6V11521029_en--_c
Before using our products, it is important that you read the documents supplied
with or ordered at the same time as the products (equipment, applications, tools
etc.) carefully and in full.
We assume that persons using our products and documents are authorized and
trained appropriately and have the technical knowledge required to use our
products as intended.
More information on the products and applications is available:
●
On the STEP portal (Siemens employees only) at
https://wse04.siemens.com/content/P0002723/SitePages/Home.aspx
●
From the Siemens branch office near you
system supplier
●
From the support team at headquarters
if there is no local point of contact
Siemens assumes no liability to the extent allowed under the law for any losses
resulting from a failure to comply with the aforementioned points or for the
improper compliance of the same.
Only authorized personnel are permitted to make diagnostics, to rectify faults and
to restart the plant. This also applies to work carried out within the control panel
(e.g. safety checks or replacement of fuses).
The Climatix Touch panel products can only be used in the field of heating,
ventilation, air conditioning and refrigeration.
Prerequisites for flawless and safe operation of the Climatix touch panel products
are proper transport, installation and commissioning, as well as correct operation.
Fuses, switches, wiring and grounding must comply with local safety regulations for
electrical installations.
The Climatix touch panel products may only be operated by personnel who have
been instructed by Siemens Building Technologies or their delegates and whose
attention has been drawn to potential risks.
When wiring the system, high voltage section must be strictly segregated from the
DC 24 V (±15 %) safety extra low-voltage (SELV) section in order to ensure
protection against electric shock hazard!
Always observe the limits for storage and transport specified.
The Climatix touch panel products are maintenance-free, apart from cleaning at
regular intervals. System sections accommodated in the control panel should be
free from dust and dirt whenever normal service visits are conducted.
Should system faults occur and you are not authorized to make diagnostics and
rectify faults, call your service personnel of Siemens Building Technologies.
The device is considered electrical and electronic equipment for disposal in terms
of the applicable European Directive and may not be disposed of as domestic
garbage.
●
Dispose of the device through the channels provided for this purpose.
●
Comply with all local and currently applicable laws and regulations.
About this document
Before you start
www.siemens.com/sbt
fieldsupport-zug.ch.sbt@siemens.com
1
or from your
7 | 30
Advertisement
Table of Contents
