Programming Mode - Ricoh Aficio 401 Service Manual

25 April 1997
7. PRODUCT NAME AND DEVICE NAME
7.1 Overview
The product name is used as a response when the host machine inquires
using the PostScript for Macintosh.
The device name is used for the SCSI device name on the SCSI bus.
Also, the product name will be used for the demo page from this machine.
This information is stored in the SCU.
The product name or device name is forwarded to the host PC through the
main controller, depending on the type of data requested from the host PC.

7.2 PROGRAMMING MODE

The following table shows the programming mode for the production name
and device name.
Mode Method Entry
OEM Code
SP 5818
Setting
NOTE: This only needs to be registered if the NVRAM on the SCU is
defective.
Brand Product Name
Name
0 Ricoh Ricoh Aficio 401
1 NRG NRG D440/2840/3240
2 Not used
3 Savin Savin 9940DPC
4 Not used
5 Infotec infotec 5402 MF
6 Lanier Lanier 5040 MFD
13
PRODUCT NAME AND DEVICE NAME
Device Name
Vender ID Product ID
Ricoh
NRG
Savin
infotec
Lanier
Aficio 401
D440/2840/
3240
9940DPC
5402MF
5040MFD