Download Print this page

Specification - Toro TEMPUS-AG-MV User Manual

Main valve or pump controller 1 station

Advertisement

SPECIFICATION

DIMENSIONS
Width : 14 cm
Height : 9 cm
Depth : 5,5 cm
INSTALLATION
Raccordement à un capteur de pluie, compteur d'eau ou
détecteur de pression
Raccordement de la vanne maîtresse ou relais et pompe
Compatible avec un solénoïde à impulsion de 9V
Longueur maximale du câblage avec solénoïdes : 300 m
POWER SUPPLY
9V 6AM6 ou 6LR61 Alkaline battery (not included)
Current consumption : 0.1mA
Installing the wrong type of battery may cause an explosion or fire hazard.
INSTALLATION GUIDELINES
The TEMPUS-AG-MV is made for an outdoor use. You can place it in a buried valve box or set it on a wall
(concrete, brick, cinder blocks) with 2 dowels and 2 countersunk screws of 4X40 not included.
In order to clean the TEMPUS-AG-MV, use soapy water with a sponge and then a soft cloth to wipe it off.
USE
Ambient temperature of product use: -20°C to 50°C
Use in humid environment IP68
(test conditions: 1h at 1m depth)
Altitude use up to 2000m
Indoor and outdoor use
Polution level 2
Maximum relative humidity of 80% for temperatures
up to 31°C and linear decrease up to 50% of relative
humidity at 40°C
FEATURES
Bluetooth® Smart 4.0 Low Energy
TM
LoRa
radio communication
Permanent programming save
Internal clock saved in case of power failure < 30 s
Toro TEMPUS-AG-MV
3

Advertisement

loading

This manual is also suitable for:

Tempus-ag-ct