Maintenance/Replacement - Lynx RADIEN Trail Series Operator's Manual

Maintenance/Replacement

PROCEED WITH A VISUAL INSPECTION OF YOUR TRACK BEFORE
EACH USE.
Look for any defects, such as:
– Perforations in the track
– Tears in the track (particularly around traction holes on studded
tracks)
– Lugs that are broken or torn off, exposing portions of rods
– Delamination of the rubber
– Broken rods
– Broken studs (studded tracks)
– Bent studs (studded tracks)
– Missing studs
– Studs that are torn off the track
– Missing track guide(s)
– Also, ensure that studs nut are tighten to the recommended
torque.
On approved studded tracks, replace broken or damaged studs
immediately. If your track shows signs of deterioration, it must be
replaced immediately. When in doubt, ask your dealer. Always
proceed with a visual inspection of your track before each use.
Riding with a damaged track or studs could lead to loss of con-
trol.
____
WARNING
SAFETY INFORMATION
TRACTION ENHANCING PRODUCTS
___
45