CDA FWC881BL Installation, Use And Maintenance Manual page 19

cabinet (Fig.10).
6. Unscrew and transfer the hinge pin (8)
and door support (7) to the opposite
lower hinge (Fig.8).
7. Unscrew and transfer the door adapter
(9) to the designated top positions of
the door (Fig.9).
8. Rotate the door 180° and relocate it
to the designated position. Screw
the bottom hinges on and tighten
them (Fig.11).
9. Adjust door alignment by loosening
the screws (10) and repositioning the
door apadter (9) to achieve the
desired level. (Fig.9).
10. Transfer the handle and caps to the
opposite positions.
11. Refit the plinth by following the steps on
page 19.
9
Fig. 9
11
Fig. 10
3 5
Fig. 11
10
4
19