Viewing Pictures From Connected Equipment - Sony KDL-26E4000 Operating Instructions Manual

Viewing pictures from
connected equipment
Switch on the connected equipment, then
perform one of the following operation.
For equipment connected to the scart sockets using
a fully-wired 21-pin scart lead
Start playback on the connected equipment.
The picture from the connected equipment appears
on the screen.
For an auto-tuned VCR/ DVD recorder
In analogue mode, press PROG +/-, or the number
buttons, to select the video channel.
For other connected equipment
Press / to display a list of connected
F f
/
equipment. Press
source, then press .
The highlighted item is automatically selected if you
do not perform any operation for two seconds after
pressing .
If you have set an input source to "Skip" in the "AV
Preset" menu (page 27), that input source does not
appear in the list.
z
To return to normal TV mode, press DIGITAL or
ANALOG.
Symbol on the Description
screen
AV1 To see the equipment connected to
A.
AV2 To see the equipment connected to
B.
~
SmartLink is a direct link between
the TV and a VCR/DVD recorder.
AV3 To see the equipment connected to
L.
HDMI 1* To see the equipment connected to
D.
HDMI 2* To see the equipment connected to
E.
If the equipment has a DVI socket,
connect the DVI socket to the
HDMI IN socket through a DVI-
HDMI adaptor interface (not
supplied), and connect the
equipment's audio out socket to the
audio in HDMI IN socket.
18
GB
to select the desired input
Symbol on the Description
screen
To see the equipment connected to
HDMI 3*
K.
~
*
• Be sure to use only an authorized HDMI cable bearing
the HDMI logo. We recommend that you use a Sony
HDMI cable (high speed type).
• When "Control for HDMI" compatible equipment is
connected, communication with the connected
equipment is supported. Refer to page 19 to set up this
communication.
• When connecting an audio system with HDMI socket,
be sure to also connect to the HiFi socket.
Component To see the equipment connected to
C.
PC To see the equipment connected to
H.
z
It is recommended to use a PC
cable with ferrites, such as the
"Connector, D-sub 15" (ref. 1-
793-504-11, available in Sony
Service Centre) or equivalent.
To connect Do this
Headphones M Connect to the i socket to listen to
sound from the TV on headphones.
Provides access to pay TV services.
Conditional
For details, refer to the instruction
Access Module
(CAM) I
manual supplied with your CAM.
To use the CAM, remove the
"dummy" card from the CAM slot,
then turn off the TV and insert your
CAM card into the slot. When you
are not using the CAM, we
recommend that you keep the
"dummy" card in the CAM slot.
~
CAM is not supported in all countries.
Please check with your authorized
dealer.
Hi-Fi audio Connect to the audio output sockets
equipment G
to listen to the sound from the
TV on Hi-Fi audio equipment.
DIGITAL Use an optical audio cable.
AUDIO OUT
(OPTICAL) F
USB J
Use USB memory to display photos.
Additional operations
To Do this
Return to normal TV Press DIGITAL or ANALOG.
mode