Projector Indicator Status - Epson E8-992F User Manual

Projector Indicator Status

The indicators on the projector indicate the projector status and let you know
when a problem occurs. Check the status and color of the indicators and then
refer to this table for a solution.
• If the indicators display a pattern not listed in the table below, turn
a
the projector off, unplug it, and contact Epson for help.
EB‑ ‑ E20/EB‑ ‑ E10/EB‑ ‑ E01/VS260
Power indicator
Status indicator
B
Wireless LAN indicator
C
Lamp indicator
D
Temp (temperature) indicator
E
Projector status
Indicator and status Problem and solutions
Power: Lit blue Normal operation.
Status: Lit blue
Lamp: Off
Temp: Off
Power: Lit blue Warming up, shutting down, or cooling down.
Status: Flashing blue When warming up, wait about 30 seconds for an image
to appear.
Lamp: Off
All buttons are disabled during warm-up, shutting
Temp: Off
down, and cooling down.
Power: Lit blue Standby, sleep mode, or monitoring.
Status: Off When you press the power button, projection starts.
Lamp: Off
Temp: Off
Power: Flashing blue Preparing for monitoring and all features are disabled.
Status: Off
Lamp: Off
Temp: Off
Power: Flashing blue Projector is too hot.
Status: Indicator status
• Make sure that the vents and air filter are not clogged
varies
with dust or obstructed by nearby objects.
Lamp: Indicator status
• Clean or replace the air filter.
varies
• Make sure the environmental temperature is not too
Temp: Flashing orange
hot.
169