Projector Setup And Installation Options; Projection Distance - Epson E8-992F User Manual

page of 210

/ 210
Contents
Table of Contents
Bookmarks

Table of Contents

Projector Placement

Warning

• Do not cover the projector's air intake or air exhaust vents. If the vents are

covered, the internal temperature could rise and cause a fire.

• Do not use or store the projector in locations where it will be subject to dust or

dirt. Otherwise, the quality of the projected image may decline, or the air filter

may become clogged, resulting in a malfunction or fire.

• Do not install the projector on an unstable surface or in a location beyond the

weight specifications of the projector. Otherwise, it could fall or topple causing

an accident and injury.

• When installing the projector in a high position, take measures to prevent falling

by using wires to ensure safety in an emergency, such as an earthquake, and to

prevent accidents. If it is not installed correctly, it could fall causing an accident

and injury.

• Do not install in locations where salt damage could occur, or in locations subject

to corrosive gas such as sulphuric gas from hot springs. Otherwise, corrosion

could cause the projector to fall. It could also cause the projector to malfunction.

Attention

• Do not operate the projector on its side. This may cause the projector to

malfunction.

• If you are using the projector at altitudes above 1,500 m, set the High Altitude

Mode setting to On in the projector's menu to ensure the projector's internal

temperature is regulated properly.

s Extended > Operation > High Altitude Mode

• Try not to setup the projector in locations subject to high humidity and dust, or

in locations subject to smoke from fires or tobacco smoke.

g g Related Links

• "Projector Setup and Installation Options"

• "Projection Distance"

p.25

• "Image Shape"

p.50

• "Projector Setup Settings - Extended Menu"

p.25

p.134