Buttons; Programmes - Siemens WM14VKHEDN User Manual And Installation Instructions

Buttons

7 Buttons
The selection of programme settings depends on the programme that is set.
Buttons
You can see the selection options for each programme in the overview for
→ "Programmes", Page 26.
Button
(Start/Reload/
Pause)
varioSpeed
- ⁠ + (- Ready in
+)
°C (Temperature
Selection)
(Spin Speed
Reduction)
Selection
¡ Start
¡ Cancel
¡ Pause
¡ Activate
¡ Deactivate
¡ Activate
¡ Deactivate
¡ Basic dosage
¡ Activate
¡ Deactivate
¡ Dispenser con-
tents
¡ Basic dosage
1–24 hours
– 90 °C
- 1400
Description
Start, cancel or pause the pro-
gramme.
Activate or deactivate a short washing
programme.
Note: Energy consumption increases.
The washing result is not affected by
this.
Briefly press the button to activate or
deactivate the intelligent dosing sys-
tem for liquid detergent
Press the button for approx. 3
seconds to set the basic dosage.
→ "Intelligent dosing system",
Page 41
Briefly press the button to activate or
deactivate the intelligent dosing sys-
tem for fabric softener
tergent .
Press the button for approx. 3
seconds to specify the contents of the
dispenser or set the basic dosage.
→ "Intelligent dosing system",
Page 41
Set the programme end.
The programme duration is already in-
cluded in the set number of hours.
Once the programme has started, the
programme duration is displayed.
Adjust the temperature in °C.
Adjust the spin speed or activate
(Rinse Hold).
If is selected, the water is not
drained at the end of the washing
cycle and the spin cycle is deactiv-
ated. The laundry remains in the water
used for rinsing.
Buttons en
.
or liquid de-
23