Sony KDL-22E5300 Operating Instructions Manual page 36

Auto Start-up
Language
Product Information
Factory Settings
Analogue Set-up
Programme List
Display
1 Digit Direct
Favourite Set-up
Auto Tuning
Programme Sorting
36
GB
Auto Devices Off When this is set to "On", the connected equipment that is
compatible with Control for HDMI turns off when you turn
off the TV.
Auto TV On When this is set to "On", the TV turns on when you turn on
the connected equipment that is compatible with Control for
HDMI.
Tuner Box If set to "Advanced", you can select a channel tuned by
Control
connected equipment using the TV's remote.
HDMI Device List Displays a list of connected equipment that is compatible
with Control for HDMI.
~
• You cannot use "Control for HDMI" if the TV operations are linked to the
operations of an audio system that is compatible with Control for HDMI.
You can run the initial Set-up that appeared when you first connected the TV, and
select the language and country/area, or tune in all available channels again.
Even if you have made the settings when you first connected the TV, you may
need to change the settings after moving house, or to search for newly launched
channels.
Sets the language displayed on the menu screens.
Displays product information of the TV.
Resets all settings to factory settings except for the "Favourite" settings and
programme preset data. After completing this process, the initial set-up screen is
displayed. Completing auto tuning in initial set-up will reset the settings that are
not reset by "Factory Settings". To retain the settings, skip the "Auto Tuning".
Select "Off" to hide the list of analogue channels from the XMB™
(XrossMediaBar).
When "1 Digit Direct" is set to "On", you can select an analogue channel using one
preset number button (0 – 9) on the remote.
~
• When "1 Digit Direct" is set to "On", you cannot select channel numbers 10 and
above by entering two digits on the remote.
Adds channels in a Favourite list.
To reset the favourite channels, select "– – –".
Tunes in all the available analogue channels.
You can retune the TV after moving house, or to search for newly launched
channels.
Changes the order of analogue channels stored in the TV.
1
Press F/f to select the channel you want to move to a new position, then press
.
2
Press F/f to select the new position for the channel, then press .