R0E53033GCFG90
Converter Board for Connecting R8C/33G and /33H Groups 32-pin 0.8mm pitch LQFP
1. Outline
The R0E53033GCFG90 is a converter board for connecting the
signals of the MCU unit R0E521300MCU00 for R8C Family
R8C/3x Series to a foot pattern for 32-pin 0.8mm pitch LQFP
of R8C/33G and /33H Groups.
2. Package Components (See Figure 1)
Check to see if the R0E53033GCFG90 package has all the
following contents before using this product.
(1) R0E53033GCFG90 converter board ........................... 1 pc.
(2) YQPACK032SA
(made by Tokyo Eletech Corporation)
(3) NQPACK032SA
(made by Tokyo Eletech Corporation)
(4) YQ-GUIDE
(made by Tokyo Eletech Corporation)
(5) R0E53033GCFG90 User's Manual (this manual)
3. Specifications
Table 1 Specifications
Applicable package
Insertion/removal
iterations of connector
4. Usage (See Figure 2)
The R0E53033GCFG90 can be used for debugging and
on-board
evaluation
in
NQPACK032SA on the user system.
(1) For debugging
Mount the NQPACK032SA on the foot pattern of the user
system and attach the YQPACK032SA on it. In addition,
connect the R0E53033GCFG90 to the YQPACK032SA,
and then connect the flexible cable R0E001000FLX10 of
the
emulator
to
R0E53033GCFG90.
(2) For on-board evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK032SA (not included) in order
on the NQPACK032SA on the user system.
Before using the R0E53033GCFG90, be sure to read the
precautions on page 3.
* NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK, TQSOCKET, CSSOCKET, CSPLUG/W and
LSPACK are trademarks of Tokyo Eletech Corporation.
REJ10J2151-0100 Rev.1.00
May 16, 2010
................ 1 pc.
.............. 1 pc.
.....................4 pcs.
PLQP0032GB-A
(32-pin 0.8mm pitch LQFP)
50 times guaranteed
common
by
mounting
the
upper
connector
R0E53033GCFG90
YQ-GUIDE(x4)
Figure 1 Package components of the R0E53033GCFG90
(1) For debugging
the
of
the
●: No.1 pin
Be sure to align the pins.
Figure 2 Usage of the R0E53033GCFG90
User's Manual
REJ10J2151-0100
May 16, 2010
YQPACK032SA
NQPACK032SA
Flexible cable
R0E001000FLX10
(2) For on-board
evaluation
R0E53033GCFG90
HQPACK032SA
(not included)
YQ-GUIDE (×4)
YQPACK032SA
FLASH MCU, etc.
NQPACK032SA
32-pin 0.8mm pitch
foot pattern
Page 1 of 4
Rev.1.00