R0E53034ECFK60
Converter Board for Connecting R8C/34E, /34F, /34G and /34H Groups 48-pin 0.5mm pitch LQFP
1. Outline
The R0E53034ECFK60 is a converter board for connecting the
signals of the MCU unit R0E521300MCU00 for R8C Family
R8C/3x Series to a foot pattern for 48-pin 0.5mm pitch LQFP
of R8C/34E, /34F, /34G and /34H Groups.
2. Package Components (See Figure 1)
Check to see if the R0E53034ECFK60 package has all the
following contents before using this product.
(1) R0E53034ECFK60 converter board............................ 1 pc.
(2) YQPACK048SD
(made by Tokyo Eletech Corporation)
(3) NQPACK048SD
(made by Tokyo Eletech Corporation)
(4) YQ-GUIDE
(made by Tokyo Eletech Corporation)
(5) R0E53034ECFK60 User's Manual (this manual)
3. Specifications
Table 1 Specifications
Applicable package
Insertion/removal
iterations of connector
4. Usage (See Figure 2)
The R0E53034ECFK60 can be used for debugging and
on-board
evaluation
in
NQPACK048SD on the user system.
(1) For debugging
Mount the NQPACK048SD on the foot pattern of the user
system and attach the YQPACK048SD on it. In addition,
connect the R0E53034ECFK60 to the YQPACK048SD,
and then connect the flexible cable R0E001000FLX10 of
the
emulator
to
R0E53034ECFK60.
(2) For on-board evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK048SD (not included) in order
on the NQPACK048SD on the user system.
Before using the R0E53034ECFK60, be sure to read the
precautions on page 3.
* NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK, TQSOCKET, CSSOCKET, CSPLUG/W and
LSPACK are trademarks of Tokyo Eletech Corporation.
REJ10J1864-0200 Rev.2.00
Apr 16, 2010
................ 1 pc.
.............. 1 pc.
.....................4 pcs.
PLQP0048KB-A
(48-pin 0.5mm pitch LQFP)
50 times guaranteed
common
by
mounting
the
upper
connector
R0E53034ECFK60
YQ-GUIDE (×4)
Figure 1 Package components of the R0E53034ECFK60
the
of
the
Figure 2 Usage of the R0E53034ECFK60
User's Manual
REJ10J1864-0200
Rev.2.00
Apr 16, 2010
YQPACK048SD
NQPACK048SD
Page 1 of 4