Cirs ZEUS 008Z User Manual

Cirs ZEUS 008Z User Manual

Mrgrt motion management qa phantom

Advertisement

Quick Links

ZEUS: MRgRT Motion Management
QA Phantom
Model 008Z
IMAGE ACQUISITION • TREATMENT PLANNING • DOSE DELIVERY
USER GUIDE
900 Asbury Ave • Norfolk, Virginia 23513 • USA • Tel: 757-855-2765 • WWW.CIRSINC.COM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ZEUS 008Z and is the answer not in the manual?

Questions and answers

Summary of Contents for Cirs ZEUS 008Z

  • Page 1 ZEUS: MRgRT Motion Management QA Phantom Model 008Z IMAGE ACQUISITION • TREATMENT PLANNING • DOSE DELIVERY USER GUIDE 900 Asbury Ave • Norfolk, Virginia 23513 • USA • Tel: 757-855-2765 • WWW.CIRSINC.COM...
  • Page 2: Table Of Contents

    . . . . . . . . . . . . 9 CIRS Motion Control Software . . . . . . . . . . .
  • Page 3: Overview

    The integration of MR imaging in radiation therapy facilitates real time motion management. • Non-ferromagnetic materials The CIRS Zeus MRgRT Motion Management QA phantom is designed to => MR safe address such needs. Zeus is MR Safe due to the use of piezoelectric motors and non-ferro-magnetic materials.
  • Page 4: Safety

    Controller. WARNING: DUE TO THE NEED TO SHIELD ACTUATOR FOR EMI, HEAT IS GENERATED INSIDE. THEREFORE, CIRS STRONGLY RECOMMENDS THAT THE PHANTOM IS RUN IN SESSIONS OF LESS THAN 1 HOUR WITH HALF HOUR BREAKS BETWEEN SESSIONS.
  • Page 5: Unpacking Instructions

    Unpacking Instructions Before you open the case check the Remove wall partition from the case and Remove cables. three Drop ‘N’ Tell indicators on the set aside. right side of the case. Drop ‘N’ Tell shipping damage indicator shows when a case has been dropped in transit and contains potential dam- aged goods.
  • Page 6: Zeus Assembly Procedure

    Assembly Procedure Place rod into phantom body and screw Insert ion chamber into each cavity hole. Place phantom body on base plate into the rod and actuator together. (Moving target) the 4 slots as shown in image above. Insert ion chamber into each cavity hole. Insert ion chamber into each cavity hole.
  • Page 7: Zeus Cables And Connections

    Cables and Connections WARNING: FOLLOW THE CABLE CONNECTION STEPS AS THEY ARE PRESENTED IN THIS USER GUIDE. CONNECTING THE CABLES WITH THE CONTROLLER “POWER ON” CAN SERIOUSLY DAMAGE THE PHANTOM’S ELECTRONICS. Attach ethernet cable to back of Plug the Cable DB26 m/m to back of Plug power cord into the back of controller and to back of actuator.
  • Page 8: Viewray Mridian System Accessories

    ViewRay MRIdian System Accessories WARNING: FOLLOW THE CABLE CONNECTION STEPS AS THEY ARE PRESENTED IN THIS USER GUIDE. CONNECTING THE CABLES WITH THE CONTROLLER “POWER ON” CAN SERIOUSLY DAMAGE THE PHANTOM’S ELECTRONICS. LOW PASS RF FILTER Connect the female connector of the RF Push the 40ft cable into the waveguide.
  • Page 9: An Ethernet Connection

    Adapter” folder found on the provided USB drive or download tion is finished, plug the “USB-to-Network Adapter” into the zipped folder from the CIRS website. Unzip to a known your PC’s USB port and acknowledge the Windows installa- location and follow instructions from “Instructions.pdf”...
  • Page 10 Select Internet Protocol Version 4 (TCP/IPv4) and click on prop- In the internet Protocol Version 4 (TCP/IPv4) properties window, erties change from default “Obtain an IP address automatically” to “Use the following IP address:” Enter “192.168.0.101” as the IP address and “255.255.255.000” as the Subnet mask. Note: If an IP address conflict occurs because IP address 192.168.0.101 is already assigned to another Net work Adapter, the user can try any other IP address between...
  • Page 11: Cirs Motion Control Software

    If the end-user is offline during use of the phantom, it is recom- INTRODUCTION mended that a copy of the CIRS Motion Control User Manual is CIRS Motion Control is an application which allows you to control downloaded and saved. Once a copy of the manual is saved in a...
  • Page 12: Zeus Specifications

    1.1 kg (2.4 lbs) Note: Customers must complete their order with the purchase of the moving rod. *Refer to separate CIRS cavity code list for available chamber cavities. It is recommended to choose the same cavities for both the body and rod.
  • Page 13: Warranty

    CIRS not to comply with documented order specifications. You must Zeus: MRgRT Motion Man- 24 Months return the product to CIRS within 30 calendar days of the issu- agement QA Phantom ance of the RMA. All returns should be packed in the original cases...
  • Page 14: Notes

    NOTES:...
  • Page 15 NOTES:...
  • Page 16 COMPUTERIZED IMAGING REFERENCE SYSTEMS, INC . 900 Asbury Ave Norfolk, Virginia 23513 USA Toll Free: 800.617.1177 Tel: 757.855.2765 Fax: 757.857.0523 Email admin@cirsinc.com www .cirsinc .com Technical Assistance 1.800.617.1177 Computerized Imaging Reference Systems, Inc. has ©2019 Computerized Imaging Reference Systems, Inc. All rights been certified by UL DQS Inc.

This manual is also suitable for:

008z

Table of Contents