Table of Contents
Advertisement
Chapter
4
Customising TV Settings
4
Adjusting the Picture Settings
Allows you to set your preferred picture mode.
1. Press the MENU button and then press the
PICTURE and then press the OK button.
2. Press the
press the OK button.
•
Press the
Picture Mode
Contrast
Brightness
Sharpness
Colour
Energy Saving
Backlight
Advanced
Picture Settings
Dolby Vision
Notifications
3. Press the BACK button to return to the previous menu.
4. Press the EXIT button to exit the menu.
18
JVC 43' LED Smart 4K HDR TV LT-43C888 Manual.indd 18
buttons to select the following picture options and then
buttons to adjust the levels in the menus.
Your TV has some pre-set picture modes: Dynamic - Natural - Cinema - Sports. The default setting is
Natural. You can also manually adjust each mode. If Dolby Vision is detected Dolby Vision Dark and Dolby
Vision Bright modes will replace Cinema and Natural modes.
Adjusts the difference between light and dark levels in the picture.
Increases or decreases the picture brightness.
Adjusts the level of crispness in the edges between light and dark areas of the picture.
Controls the colour intensity.
The energy saving mode can be adjusted from Custom - OFF - Minimum - Medium - Maximum - Auto -
Screen Off. Adjusting this setting will reduce the brightness and power consumption of your TV or turn
the screen off altogether.
Adjusts the backlight setting. Only available when Custom Energy Saving is selected above.
Select to have more advanced adjustments to your TVs picture.
Dynamic
Adjusts the contrast to pre-set levels. OFF
Contrast
- LOW - MEDIUM -HIGH
Noise
Reduces the noise level of the connected
Reduction
device: Off / Low / Middle / High.
Colour
Adjusts the colour temperature. NORMAL
Temp
- WARM - COOL
Picture
Adjusts the aspect ration of the picture.
Zoom
AUTO - 16:9 - SUBTITLE - 14:9 - 14:9 Zoom
- 4:3 - CINEMA.
Film Mode Film mode can be switched to AUTO or
OFF. Auto mode will adjust the frame rate
to produce the clearest motion.
Skin Tone Adjusts the skin tone from -5 to 5.
Colour
Adjusts the colour tint from red to green.
Shift
Colour
Select to adjust the picture colour
Shift
between Red and Green.
You can switch Dolby Vision Notifications on or off. When the notification is on, if you press the Info
button it will show if you are watching HDR content.
buttons to select the
22/02/2018 10:30
Advertisement
Table of Contents
