Table of Contents
Advertisement
Chapter 3. Menu Features
General Guidelines to MENU Access and Settings
1. Press Soft Key [Menu]. The three menu items will appear on the display screen.
2. Press[? ] to go through the list of menu features, or use the side keys.
3. Press the corresponding number to the menu item that you want to select. Then the sub-menu
list will appear on the screen.
4. Press the appropriate key to select the sub-menu you want to access.
5. Select preferred settings, using the [? ] keys. Press Soft Key 2 [Back] to go one step backward
while accessing menu or selecting settings.
6. Press Soft Key 1 [Ok] to save the settings or Soft Key 2 [Back] to cancel without saving.
Sound ([Menu]+[1])
Ring Sound ([Menu]+[1]+ [1])
Select the ringer sound with [? ] [? ] or [? ] key. The ring sound will notify that you have an
incoming call.
Ring Type ([Menu] +[1]+[2])
Select one out of four ring types (Ring, Vibrate, Vib+Ring and Lamp) with [? ] [? ] or [? ] key.
Ring & Vibrate Volume ([Menu] +[1]+[3])
Adjust the volume of the ringer using the [? ] [? ] or [? ] key.
Key Tone ( [Menu] +[1]+[4] )
Set Key Tone length and touch tone playback speed.
??Normal : Sends out a tone for a fixed period of time only if you keep the key pressed.
??Long : Sends out a continuous tone for as long as you keep the key pressed.
Key Volume ( [Menu] +[1]+[5] )
Adjust the key beep volume (the volume of sound on key pressing).
Ear Volume ( [Menu] +[1]+[6] )
Adjust the earpiece volume during a call, by pressing the side keys.
Alerts ( [Menu]+[1]+[7] )
1. Fade
( [Menu]+[7]+[1] )
Set an alert to inform you when you have lost a call or lose services.
2. Minute
( [Menu]+[7]+[2] )
Alerts you 10 seconds before the end of every minute during a call.
3. Service
( [Menu]+[7]+[3] )
If on, alerts you when service changes.
When you enter a service area, the phone displays "Entering Service Area" message.
When you leave a service area, the phone displays "Leaving Service Area" message.
4. Call Connect
( [Menu]+[7]+[4] )
Alert tones notify the user of the time when the call is connected.
Display ( [Menu]+[2] )
Backlight ( [Menu]+ [2]+[1] )
Allows you to select how long or when the display screen and keypad are backlit. The backlight is
turned off 10 seconds after the last key is pushed. the backlight is turned off 30 seconds after the
last key is pushed. "On when Cellcase open" means that the backlight is always on while Cellcase
Advertisement
Table of Contents
