LG -VX7000A User Manual page 10

1. Port Map (DATA DIAG OPTION)
U1 U2 -- : When using UART 1 and UART2 simultaneously
U1 -- HFK : When using UART 1 only for normal case
2. Data Baud (Data Baud Set)
AUTOBAUD : Default Data Baud Rate (ipr = 0)
9,600/19,200/38,400/57,600/115,200/230,400 : Optional Data Baud Rate
3. Diag Baud (Diag Baud Set)
38,400 : Default Diag Baud Rate
115,200 : Optional Diag Baud Rate
System ([Menu]+ [4])
System Select ([Menu]+ [4]+[1])
Choose setting to control which cellular company your phone uses. Leave this setting as default
unless you want to alter the system selection. (As instructed by your service provider.)
??Home is B (Automatic_B, Home only, Automatic_A) is displayed.
Set NAM ([Menu]+ [4]+[2])
Select the phone' s NAM (Number Assignment Module) if the phone is registered with multiple
service provides.
Auto NAM ([Menu]+ [4]+[3])
Allows the phone to automatically switch to one of the programmed Telephone No. if it is operating
in the corresponding service provider area.
Force Call ([Menu]+ [4]+[4])
Make next call in analog mode. You have 30 seconds to place an analog call. This feature is
typically used for data applications.
TTY Mode ([Menu]+ [4]+[5])
To enable or disable TTY mode, select ' TTY Mode "Enable"/"Disable" ' using [? ] [? ] or [? ] key.
If TTY mode is enabled, TTY Features is activated during call.
Security ([Menu]+[5])
Lock code is commonly last 4 digit of your phone. (You must enter the lock code after pressing
[Menu] ). If you need to modify the password, you may modify it using the "New Lock Code" of
Security.
Lock Mode ([Menu]+ [5]+[1])
Helps you to protect your phone from unauthorized use and once the phone is locked, the phone is
restricted from making calls until the lock code is entered.
However you can still receive phone calls and make emergency calls while your phone is locked.
"Never" means that the phone is never locked (Lock mode can be used). When locked, you can
only make emergency calls or receive incoming calls. "On power up" means that locked the phone
when the phone is turned on. "Always" means that the phone is always locked.
Restrict ([Menu]+ [5]+[2])
Set call restrictions to "Yes" or "No". If set to "Yes", you can only make calls to emergency numbers
and phone numbers in Phonebook Entry. You can still receive calls in restrict mode. Check with
your service provider.