Philco PD-12 Operating Manual page 20

Preparations and inspection while beginning the operation
Confirm the tank is installed in position
The dehumidifier can't operate if the water in the tank is full or isn't installed well.
•
How to move water tank
Hold the water tank sides and pull out
•
Method to empty out the water tank
•
Pull out the water tank from the dehumidifier
•
Incline the water tank according to the indication direction and empty out the water slowly.
•
Install the water tank back into the dehumidifier.
Operation manual
1. Power Button:
This button can control the machine on and off;
2. Dehumidification Mode:
Press to enter the mode selection state, can switch to normal
dehumidification, continuous dehumidification, ventilation mode,
dry clothes mode;
Normal dehumidification: adjustable wind speed and humidity
Continuous dehumidification: low wind, humidity is not adjustable
Ventilation mode: Adjustable wind speed, humidity is not adjustable
Drying mode: default high wind mode, wind speed and humidity are not adjustable
20