Table of Contents
Advertisement
Auto Channel Scan
1. On the Tuner screen, select either Antenna or Cable.
Press the OK button or right arrow ( ) to continue to
the next screen.
Note: If you are using a satellite or cable set-top box,
you do not have to complete the Channel Search.
2. The Channel Scan screen is now displayed. The
default choice is to scan. Press the OK button or the
right arrow ( ) to begin the channel scan for available
Note: If you do not want to scan for channels at this
time, press CLEAR to stop the scanning process.
3. The screen will change to show the progress of the
scanning process.
appears to inform you that the unit has completed the
Initial Setup.
5. Press CLEAR to exit the Wizard and begin watching
Skip Scan or by pressing the CLEAR button, you will need
to follow this process the next time you decide to complete
this procedure.
1. Select the TV as input (using the INPUT
which will display the option of scanning the channels
again.
3. If you are using a satellite or cable set-top box, you do
not have to complete the Channel Search.
Note: See the Setup Menu to:
Scan (page 24).
See the Language Menu to:
Please select your tuner mode:
Initial Setup
Please connect antenna or cable.
Start Channel Scan now?
If you skip this step, the Channel
Scan can be performed by going to
the Setup menu later.
Complete screen
Initial Setup
Congratulations!
The Initial Setup is complete.
Please press [OK] to exit the Initial
Setup Menu.
Signal Type,
16
Initial Setup
Tuner
Antenna
Back
Select
Next
OK
Channel Scan
Skip Scan
0%
Back
Select
Next
OK
Complete
Back
CLEAR
Cable
Exit
CLEAR
Scan
Exit
CLEAR
Exit
Advertisement
Table of Contents
