Auto Channel Scan; Skip Scan - TCL L32HDF11TA User Manual

Auto Channel Scan

1. On the Tuner screen, select either Antenna or Cable.
Press the OK button or right arrow ( ) to continue to
the next screen.
Note: If you are using a satellite or cable set-top box,
you do not have to complete the Channel Search.
2. The Channel Scan screen is now displayed. The
default choice is to scan. Press the OK button or the
right arrow ( ) to begin the channel scan for available
channels to be stored in the TV's memory.
Note: If you do not want to scan for channels at this
time, press CLEAR to stop the scanning process.
3. The screen will change to show the progress of the
scanning process.
4. When the scanning is finished, the Complete screen
appears to inform you that the unit has completed the
Initial Setup.
5. Press CLEAR to exit the Wizard and begin watching
TV.

Skip Scan

If you elect to skip the Auto Scanning process by choosing
Skip Scan or by pressing the CLEAR button, you will need
to follow this process the next time you decide to complete
this procedure.
1. Select the TV as input (using the INPUT key).
2. Go through the menu options to select the Signal Type,
which will display the option of scanning the channels
again.
3. If you are using a satellite or cable set-top box, you do
not have to complete the Channel Search.
Note: See the Setup Menu to:
• Scan channels automatically again (page 23).
• Add desired channels not memorized by the Channel
Scan (page 24).
• Reset the time zone (page 27).
See the Language Menu to:
• Change to another language (page 32).
Initial Setup
Please select your tuner mode:
Back
Initial Setup
Please connect antenna or cable.
Start Channel Scan now?
If you skip this step, the Channel
Scan can be performed by going to
the Setup menu later.
Back
Initial Setup
Congratulations!
The Initial Setup is complete.
Please press [OK] to exit the Initial
Setup Menu.
Back
16
Tuner
Antenna
Cable
Select Next Exit
OK CLEAR
Channel Scan
Scan
Skip Scan
0%
Select Next Exit
OK CLEAR
Complete
Exit
CLEAR