Table of Contents
Advertisement
Chapter 2 - Understanding the Basics
Turning the TV On and Off
2. Press
3. Press
Note: When your TV is in Standby Mode, it is still receiving some power. To completely
disconnect the power, unplug the power cord.
Selecting the Video Input Source
The INPUT list appears.
2. To select an input source, press the INPUT button
repeatedly or use the up and down arrows (
highlight the video source and press OK to select.
Selecting a Channel
1. Select the desired channel by using the CH+/-
The CH+/- can select only memorized channels.
Analog TV Channels – When selecting an analog channel, such as channel 12, press the 1,
then the 2, then press OK.
DTV
appropriate place. So, for 12.3, you would press 1, then 2, then dot, then 3. Press OK to select.
3. Press GO BACK to return to the previously viewed channel.
What is a Sub-channel?
A sub-channel is a channel such as 12.3. By using high-compression technology, digital broadcasting
enables multiple signals to be sent simultaneously. Therefore, you can select more than one program
per main channel, since digital broadcasting technology can distinguish between multiple channels on
Adjusting/Muting the Volume
1. Use the VOL +/- to adjust the volume. The volume bar will be displayed at the bottom part of your
you have completed the adjustment.
2. Press MUTE
few seconds.
3. When you press MUTE again, the volume reverts to its previous level. Or you can press the
VOL + to cancel the mute function.
INPUT on the remote control.
) to
17
Input
TV
AV
No Label
CMPT
No Label
PC
No Label
HDMI1 No Label
HDMI2 No Label
HDMI3 No Label
Advertisement
Table of Contents
