Grundig GD7510644UW User Manual page 7

values on the type label.
Make sure the grounding is
carried out by an expert elec-
trician. Do not use the
product without suitable
grounding to local/national
regulations.
• Plug the product in a socket
with voltage and frequency
values suitable to those indic-
ated on the type label.
• Do not plug the product to
loose, broken, dirty, greasy
sockets or sockets that has
come out their seats or sock-
ets with a risk of water con-
tact.
• Use the new hose set
provided with the product. Do
not re-use old hose sets. Do
not make additions to the
hoses.
• Connect the water inlet hose
directly to the water tap. The
pressure from the tap should
be minimum 0.1 MPa (1 bar)
and maximum 1MPa (10
bars). 10 to 80 litres of water
should be running from the
tap in a minute in order for
the product to function prop-
erly. If the water pressure is
above 1 MPa (10 Bars), a
pressure-reducing valve
should be fitted. The max-
imum allowed temperature is
25°C.
• Fit the end of the water dis-
charge hose to the dirty water
discharge drain, the sink or
the bathtub.
• Place the power cable and
houses in locations without
risk of tripping.
• Do not install the product be-
hind a door, a sliding door or
at another location that will
prevent the door from open-
ing completely.
• If a drier is to be placed on
the product, fix with a suitable
connection apparatus ob-
tained from the authorised
service.
• There is a risk of contact with
electrical pieces when the up-
per trays is removed. Do not
dismantle the upper tray of
the product.
• Place the product at least 1
cm away from the edges of
furniture.
• Make sure the room in which
the installation performed is
adequately ventilated, as
there may be a risk of un-
desirable gases coming out
of the device igniting other
fuels in the room or interact-
ing with an open flame.
EN / 7