Temperature Selection ....29 Table of Contents Spin Speed Selection..... 29 1 Safety Instructions......Drying Programmes....... 30 Intended Use........Washing and Drying Programmes 31 Safety of Children, Vulnerable 6.10 Programme and Consumption Persons and Pets ......Table ..........Electrical Safety......6.11 Auxiliary Function Selection..
Page 3
Please read this user manual first! Dear Customer, Thank you for choosing Grundig product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product.
1 Safety Instructions This section includes the safety • The manufacturer assumes no instructions necessary to pre- responsibility for any damage vent the risk of personal injury or due to misuse or mishandling. material damage. • This appliance is intended to be used in household and sim- Our company shall not be held ilar applications.
• Children under the age of 3 Electrical Safety should be kept away unless • Product should be unplugged continuously supervised. during installation, mainten- • Electrical products are danger- ance, cleaning and repair pro- ous for children and pets. Chil- cedures.
• When unplugging the appli- Installation Safety ance, don't hold the power • Check the information on the cord, but the plug. manual and installation in- • Make sure the plug is not wet, structions to prepare the dirty or dusty. product for installation and Handling Safety make sure the electrical mains,...
Page 7
• Place the product on a level valve should be fitted. The and hard surface and balance maximum allowed temperat- with the adjustable legs. ure is 25°C. • Connect the product to a • Fit the end of the water dis- grounding plug protected by a charge hose to the dirty water fuse suitable to the current val-...
• Make sure pets do not climb Operational Safety inside the product. Check in- • When you are using the appli- side the product before use. ances, use only detergents, • Do not force open the locked softeners and supplements loading door.
• Take the following precautions in hot water by adding extra to prevent formation of biofilm detergent before being dried in and malodours: the washing machine with dryer. Otherwise, fire hazard – Make sure the room where arises. the washing machine is •...
Page 10
laundry remains at a temperat- in the machine. The colour left ure where it will not be dam- by the leather parts may smear aged. You may be exposed to on other textiles. hot steam if you open the • If there is a problem that you cover without completing the cannot solve using the inform- cooling step.
• Do not dry large laundry such • Prevent the lint from accumu- as tulle curtains, curtains, lating around the product. sheets/beddings, blankets, Maintenance and rugs in the machine. Laundry Cleaning Safety may get damaged. • Do not wash the product with •...
2 Important Instructions for Environment 2.1 Compliance with WEEE Directive This product complies with EU WEEE Directive (2012/19/EU). This product bears a classifica- tion symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling.
4 Installation 4.1 Appropriate Installation Location Please read the “Safety Instruc- tions” section first! • Place the product on a hard and level floor. Do not place it onto a carpet with Your washing machine automatic- high pile or other similar surfaces. Pla- ally detects the amount of laundry cing on an improper floor shall cause placed inside when selecting a pro-...
Tilt the machine back slightly. Rest the tabs WARNING of Cover A against the lower panel. Com- Remove the transportation safety plete the assembly by rotating the cover. bolts before operating the product. • Cover B and the Cap are optional. If avail- Otherwise, the product will get able, attach cover B and the Cap.
WARNING Make sure that the cold water con- nection is performed correctly dur- ing the installation of the product. Otherwise, your laundry may come out as hot at the end of the wash- ing cycle and thus they may be worn.
4.6 Adjusting the Stands • Power cable plug must be within easy reach after installation. • If the current supply to the fuse or WARNING breaker in the house is less than 16 In order to ensure that the product Amps, have a qualified electrician install operates more silently and vibra- a 16 amp supply.
5 Preliminary Preparation • Wash trousers and delicate laundry Please read the “Safety Instruc- turned inside out. tions” section first • Laundry that are subjected to materials 5.1 Sorting the Laundry such as flour, lime dust, milk powder, etc. intensely must be shaken off before pla- •...
ply the method which is described in sec- Follow the instructions in “Pro- tion "Cleaning the loading door and the gramme and consumption table”. drum". When the appliances is overloaded product’s washing performance will drop. Moreover, noise and vibration problems may occur. For a successful drying perform- ance, do not put more laundry in the machine than specified.
5.7 Using Detergent and Softener • Do not select a programme with pre- washing if you are using a detergent pod or dispensing ball. Place the detergent WARNING pod or the dispensing ball directly among Read the manufacturer instructions the laundry in the product. on the package while using deter- •...
Page 22
• Do not exceed the recommended dosage Use of Gel and Tablet Detergents values on the detergent packaging in or- • If the detergent is fluid and there is no li- der to eliminate excessive foam and poor quid detergent compartment in your rinsing problems, to save money and pro- product, place the gel detergent in the tect the environment.
product is receiving water to the deter- • Select a programme with low temperat- gent compartment in the first rinsing ure washing while using oxygen-based step. decolourants. • Do not mix and use bleach and detergent • Oxygen-based decolourants can be used together.
SPECIAL CASE: At programme start of Cot- load is higher than half load; washing pro- tons and Cotton Eco programmes, display gramme will be adjusted accordingly and shows the duration of half load. It is the programme duration increased automatic- most common use case.
6.4 Selection of Washing Programme You can take a glance at the programmes for which you can select the drying function 1. Determine the programme suitable for in the Programme and Consumption tables. the type, quantity and soiling level of the laundry in accordance with "Programme Symbols shown on the display are and consumption table".
Page 28
clean normally soiled laundry declared to function. The special spin profile and be washable at 40 °C or 60 °C in a single steam applied at the end of the programme cycle and dries them so that they can be reduce the wrinkles on your shirts.
• Dark Care / Jeans • Towel Use this programme to protect the colour Use this programme to wash durable cot- of your dark-coloured garments or jeans. It ton laundry such as towels. Load the tow- performs high performance washing with els into the machine paying attention to special drum movement even if the temper- place them in a way that they will not con-...
Whenever a new programme is selected, When you select a new washing program, the recommended spin speed of the selec- press the Auxiliary Function Selection but- ted programme is displayed on the Spin ton to set the drying option suitable for this Speed indicator.
• Synthetic Dry • Mini Wash&Dry Use this programme to dry synthetic laun- Use this programme to wash 0.5 kg of laun- dry with a dry weight of up to 4 kilograms. dry (2 shirts) in 40 minutes or to wash 1 kg You can only dry in this programme.
Refreshing with hot air (48 min. and 38 Hygienic Ventilation programme min.) does not use water. Use this pro- gramme for clothes you want to The default duration is 58 minutes if you clean by ventilation. select the “Hygienic Ventilation” pro- WARNING: Do not put chemicals gramme.
Page 33
* : Automatically selected, cannot be can- You can see the washing duration celled. on the display of your machine *** : Eco 40-60 programme is a test pro- while selecting a programme. De- gramme according to 40 ° C temperature pending on the amount of laundry selection, EU regulation EU / 2019/2014 you have loaded into your machine,...
6.11.1 Auxiliary Functions When an auxiliary function button that cannot be selected with the • Express / Intensive current programme is pressed, the You can shorten or extend the programme washing machine will make a warn- duration with this function. Depending on ing sound.
• Steam 6.11.2 Functions/Programmes Selec- This function helps to reduce the creases ted by Pressing the Function of your cotton, synthetic and mixed clothes, Keys for 3 Seconds shorten the ironing time and remove the dirt by softening. • Drum Cleaning+ * Under conditions where the steam func- Press and hold the related auxiliary func- tion is applied at the end of the programme,...
plete. If the function is not cancelled, it will connection icon blinks when the product is be active in the subsequent washing cycles connecting the internet. If connection is as well. successful, icon will remain on. To deactivate wireless connection: •...
Timed Drying – minute To achieve the desired dryness level at a low temperature, you can choose from dry- ing durations of 30, 90 and 150 minutes. When drying a small amount of laundry (maximum 2 items), the timed drying steps In order for the End Time function to be ac- in Cotton or Synthetic dry programmes tivated and the programme to be com-...
Additional laundry can be added If the Remote Control Function is into the machine during the End selected, the door will be locked. In Time countdown. At the end of the order to open the door you must de- countdown, End Time indicator activate Remote Start Function by turns off, washing cycle starts and either pressing the Remote Start...
6.16 Changing the Selections After is not active and select a new programme. This action will cancel the current pro- Programme has Started gramme. Adding laundry after the programme has The selected programme starts started anew. If the water level in the machine is suitable when you press Start/Pause button, the Changing the auxiliary function, speed door lock will be deactivated and the door...
You can touch the “Appliances” tab in the If you turn the programme selection HomeWhiz application to view appliances button when the Child Lock is en- paired with your account. Following the in- abled, the programme will not be stallation of the application, HomeWhiz cancelled.
Page 42
PLIANCE” (touch here for setting up a Your washing machine will auto- new appliance) button in the upper right matically turn off if you cannot real- corner. Perform the setup by following ize the setup successfully within 5 both the steps below and the steps in minutes.
6.19.3 Deleting the HomeWhiz Ac- count Match Follow the following steps in order to delete a washing machine previously matched with someone else’s account. 1. Turn on your machine by using the On/ Off button. HomeWhiz Application may require 2. When your machine is running, push and you to type the product number hold the Remote Control Function but- shown on the product label.
bluetooth connection. If the symbol is You can follow whether the Remote Control flashing, the product is trying to connect. If function is On or Off through the function the symbol is off, you have no connection. indicator on the button. If the Remote Control function is Off, all the When the bluetooth connection is operations are handled on the washing ma-...
7 Maintenance and Cleaning Please read the “Safety Instruc- Repeat Drum Cleaning process in tions” section first! every 2 months. NOTICE: Use an anti-limescale Service life of your product extends and fre- suitable for the washing machines. quently experienced problems will be re- duced if it is cleaned at regular intervals.
filters prevent foreign substances and dirt NOTICE: in the water to enter the product. Filters Foreign substances left in the should be cleaned if they are dirty. pump filter may damage your product or may cause noise prob- lem. In regions where freezing is pos- sible, the tap must be closed, sys- tem hose must be removed and the water inside the product must be...
• When the pump filter starts leaking water 1. Clean any residues inside the filter as loosen it by turning (opposite clockwise). well as fibres, if any, around the pump Fill the running water to the container you impeller region. placed in front of the filter.
Page 48
• Input temperature of water is low. >>> Product stopped shortly after the pro- Required time to heat up the water ex- gramme started. tends in cold seasons. Also, washing • Machine has stopped temporarily due to time can be lengthened to avoid poor low voltage.
Page 49
• Excessive laundry is loaded in. >>> Do Product does not switch to spinning not load the product in excess. Load with step. (*) amounts recommended in the "Pro- • There is unbalanced load in the product. gramme and consumption table". >>>...
Page 50
dry. Keep detergents closed in an envir- Detergent residue in the detergent onment free of humidity and do not ex- drawer. (**) pose them to excessive temperatures. • Detergent was put in wet drawer. >>> Dry • Detergent was put in the wrong compart- the detergent drawer before putting in de- ment.
Page 51
• Some meshed laundry such as tulle may • Spinning might not be sufficient for laun- foam too much because of their texture. dry. >>> Select a higher spin speed in the >>> Use smaller amounts of detergent for washing step of the Washer-Dryer. this type of item.
Therefore, please be advised that gistered professional repairers. On the con- repairs by professional repairers (who trary, such attempts by end-users may are not authorized by Grundig ) shall void cause safety issues and damage the the guarantee. product and subsequently cause fire, flood,...
Page 53
The manufacturer/seller cannot be held li- able in any case where end-users do not comply with the above The spare part availability of the washing machine or washer-dryer that you pur- chased is 10 years. During this period, ori- ginal spare parts will be available to oper- ate the washing machine or washer-dryer properly.
Need help?
Do you have a question about the GDP810662MW and is the answer not in the manual?
Questions and answers