Temperature Selection ....29 Table of Contents Spin Speed Selection..... 29 1 Safety Instructions......Drying Programmes....... 30 Intended Use........Washing and Drying Programmes 31 Safety of Children, Vulnerable 6.10 Programme and Consumption Persons and Pets ......Table ..........Electrical Safety......6.11 Auxiliary Function Selection..
Page 3
Please read this user manual first! Dear Customer, Thank you for choosing Grundig product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product.
1 Safety Instructions This section includes the safety • The manufacturer assumes no instructions necessary to pre- responsibility for any damage vent the risk of personal injury or due to misuse or mishandling. material damage. • This appliance is intended to be used in household and sim- Our company shall not be held ilar applications.
• Children under the age of 3 Electrical Safety should be kept away unless • Product should be unplugged continuously supervised. during installation, mainten- • Electrical products are danger- ance, cleaning and repair pro- ous for children and pets. Chil- cedures.
• When unplugging the appli- Installation Safety ance, don't hold the power • Check the information on the cord, but the plug. manual and installation in- • Make sure the plug is not wet, structions to prepare the dirty or dusty. product for installation and Handling Safety make sure the electrical mains,...
Page 7
• Place the product on a level valve should be fitted. The and hard surface and balance maximum allowed temperat- with the adjustable legs. ure is 25°C. • Connect the product to a • Fit the end of the water dis- grounding plug protected by a charge hose to the dirty water fuse suitable to the current val-...
• Make sure pets do not climb Operational Safety inside the product. Check in- • When you are using the appli- side the product before use. ances, use only detergents, • Do not force open the locked softeners and supplements loading door.
• Take the following precautions in hot water by adding extra to prevent formation of biofilm detergent before being dried in and malodours: the washing machine with dryer. Otherwise, fire hazard – Make sure the room where arises. the washing machine is •...
Page 10
laundry remains at a temperat- in the machine. The colour left ure where it will not be dam- by the leather parts may smear aged. You may be exposed to on other textiles. hot steam if you open the • If there is a problem that you cover without completing the cannot solve using the inform- cooling step.
• Do not dry large laundry such • Prevent the lint from accumu- as tulle curtains, curtains, lating around the product. sheets/beddings, blankets, Maintenance and rugs in the machine. Laundry Cleaning Safety may get damaged. • Do not wash the product with •...
2 Important Instructions for Environment 2.1 Compliance with WEEE Directive This product complies with EU WEEE Directive (2012/19/EU). This product bears a classifica- tion symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling.
4 Installation 4.1 Appropriate Installation Location Please read the “Safety Instruc- tions” section first! • Place the product on a hard and level floor. Do not place it onto a carpet with Your washing machine automatic- high pile or other similar surfaces. Pla- ally detects the amount of laundry cing on an improper floor shall cause placed inside when selecting a pro-...
Tilt the machine back slightly. Rest the tabs WARNING of Cover A against the lower panel. Com- Remove the transportation safety plete the assembly by rotating the cover. bolts before operating the product. • Cover B and the Cap are optional. If avail- Otherwise, the product will get able, attach cover B and the Cap.
WARNING Make sure that the cold water con- nection is performed correctly dur- ing the installation of the product. Otherwise, your laundry may come out as hot at the end of the wash- ing cycle and thus they may be worn.
4.6 Adjusting the Stands • Power cable plug must be within easy reach after installation. • If the current supply to the fuse or WARNING breaker in the house is less than 16 In order to ensure that the product Amps, have a qualified electrician install operates more silently and vibra- a 16 amp supply.
5 Preliminary Preparation • Wash trousers and delicate laundry Please read the “Safety Instruc- turned inside out. tions” section first • Laundry that are subjected to materials 5.1 Sorting the Laundry such as flour, lime dust, milk powder, etc. intensely must be shaken off before pla- •...
ply the method which is described in sec- Follow the instructions in “Pro- tion "Cleaning the loading door and the gramme and consumption table”. drum". When the appliances is overloaded product’s washing performance will drop. Moreover, noise and vibration problems may occur. For a successful drying perform- ance, do not put more laundry in the machine than specified.
5.7 Using Detergent and Softener • Do not select a programme with pre- washing if you are using a detergent pod or dispensing ball. Place the detergent WARNING pod or the dispensing ball directly among Read the manufacturer instructions the laundry in the product. on the package while using deter- •...
Page 22
• Do not exceed the recommended dosage Use of Gel and Tablet Detergents values on the detergent packaging in or- • If the detergent is fluid and there is no li- der to eliminate excessive foam and poor quid detergent compartment in your rinsing problems, to save money and pro- product, place the gel detergent in the tect the environment.
product is receiving water to the deter- • Select a programme with low temperat- gent compartment in the first rinsing ure washing while using oxygen-based step. decolourants. • Do not mix and use bleach and detergent • Oxygen-based decolourants can be used together.
SPECIAL CASE: At programme start of Cot- load is higher than half load; washing pro- tons and Cotton Eco programmes, display gramme will be adjusted accordingly and shows the duration of half load. It is the programme duration increased automatic- most common use case.
6.4 Selection of Washing Programme You can take a glance at the programmes for which you can select the drying function 1. Determine the programme suitable for in the Programme and Consumption tables. the type, quantity and soiling level of the laundry in accordance with "Programme Symbols shown on the display are and consumption table".
clean normally soiled laundry declared to function. The special spin profile and be washable at 40 °C or 60 °C in a single steam applied at the end of the programme cycle and dries them so that they can be reduce the wrinkles on your shirts.
• Dark Care / Jeans • Towel Use this programme to protect the colour Use this programme to wash durable cot- of your dark-coloured garments or jeans. It ton laundry such as towels. Load the tow- performs high performance washing with els into the machine paying attention to special drum movement even if the temper- place them in a way that they will not con-...
Whenever a new programme is selected, When you select a new washing program, the recommended spin speed of the selec- press the Auxiliary Function Selection but- ted programme is displayed on the Spin ton to set the drying option suitable for this Speed indicator.
• Synthetic Dry • Mini Wash&Dry Use this programme to dry synthetic laun- Use this programme to wash 0.5 kg of laun- dry with a dry weight of up to 4 kilograms. dry (2 shirts) in 40 minutes or to wash 1 kg You can only dry in this programme.
Refreshing with hot air (48 min. and 38 Hygienic Ventilation programme min.) does not use water. Use this pro- gramme for clothes you want to The default duration is 58 minutes if you clean by ventilation. select the “Hygienic Ventilation” pro- WARNING: Do not put chemicals gramme.
Towel 1,60 Cold - 60 Lingerie 0,30 Cold - 30 Shirts 1,40 • • • • Cold - 60 • : Selectable. Please read Installation section of * : Automatically selected, cannot be can- the user manual before first use. celled.
Page 34
You can see the washing duration on the display of your machine while selecting a programme. De- pending on the amount of laundry you have loaded into your machine, there may be a difference of 1-1.5 hours between the duration shown on the display and the actual dura- tion of the wash cycle.
Mini / Mini 1200 00:28 0,250 Eco 40-60 + 1200 09:35 3,735 74,5 Cupboard 1200 06:55 2,036 46,5 The consumption values given for programmes other than the Eco 40-60 programme for washing and drying online are only indicative. 6.11 Auxiliary Function Selection If the selected wetness level (Iron Dry, Cupboard Dry, Cupboard Extra Dry) cannot be reached at the end...
and you will reach the appropriate pro- • Customized Programme gramme duration for your normally soiled This auxiliary function can only be used for clothes/laundry. When you press the same Cotton and Synthetic programmes together button a second time, the fast LED will light with the HomeWhiz application.
Page 37
To activate the child lock: This is not a washing programme. This is a maintenance programme. Press and hold the related auxiliary func- Do not turn this programme on tion button for 3 seconds. After the count- when there is something inside the down as “3-2-1"...
6.12 Drying Steps 6.13 End Time Time display When the end time function is selected, the remaining time until the programme starts is shown in hours such as 1h, 2h, and the remaining time to complete the programme after your programme starts is shown in hours and minutes as in the 01:30 example.
If you want to cancel the End Time func- 3. Programme follow-up indicator lights on tion, turn off and on the product by press- the display will show the current pro- ing the On/Off button. gramme step. If no programme is started or no button is pressed within 10 minutes during programme selection pro- cess, the product will automatically...
If the water level in the machine is not suit- able when you press Start/Pause button, the door lock cannot be deactivated and the door lock icon on the display remains If the temperature of the water in- side the machine is above 50°C, you cannot deactivate the door lock for safety reasons, even if the water level is suitable.
to perform various operations on the ma- It gives out an audio warning if chine. Furthermore, you can use some fea- change is not allowed. tures only with HomeWhiz function. The loading door will not open if the In order to use the Bluetooth feature of your water temperature in the machine machine, you must download HomeWhiz is high or the water level is above...
All the safety measures described in "GENERAL SAFETY INSTRUC- TIONS" section of your user manual apply to the remote opera- tion through HomeWhiz function as well 4. Follow the instructions on the display of 6.19.1 HomeWhiz Setup HomeWhiz application. In order for the application to run, a connec- 5.
6.19.3 Deleting the HomeWhiz Ac- count Match Follow the following steps in order to delete a washing machine previously matched with someone else’s account. 1. Turn on your machine by using the On/ Off button. HomeWhiz Application may require 2. When your machine is running, push and you to type the product number hold the Remote Control Function but- shown on the product label.
bluetooth connection. If the symbol is You can follow whether the Remote Control flashing, the product is trying to connect. If function is On or Off through the function the symbol is off, you have no connection. indicator on the button. If the Remote Control function is Off, all the When the bluetooth connection is operations are handled on the washing ma-...
7 Maintenance and Cleaning Please read the “Safety Instruc- Repeat Drum Cleaning process in tions” section first! every 2 months. NOTICE: Use an anti-limescale Service life of your product extends and fre- suitable for the washing machines. quently experienced problems will be re- duced if it is cleaned at regular intervals.
filters prevent foreign substances and dirt NOTICE: in the water to enter the product. Filters Foreign substances left in the should be cleaned if they are dirty. pump filter may damage your product or may cause noise prob- lem. In regions where freezing is pos- sible, the tap must be closed, sys- tem hose must be removed and the water inside the product must be...
• When the pump filter starts leaking water 1. Clean any residues inside the filter as loosen it by turning (opposite clockwise). well as fibres, if any, around the pump Fill the running water to the container you impeller region. placed in front of the filter.
Page 48
• Input temperature of water is low. >>> Product stopped shortly after the pro- Required time to heat up the water ex- gramme started. tends in cold seasons. Also, washing • Machine has stopped temporarily due to time can be lengthened to avoid poor low voltage.
Page 49
• Excessive laundry is loaded in. >>> Do Product does not switch to spinning not load the product in excess. Load with step. (*) amounts recommended in the "Pro- • There is unbalanced load in the product. gramme and consumption table". >>>...
Page 50
dry. Keep detergents closed in an envir- Detergent residue in the detergent onment free of humidity and do not ex- drawer. (**) pose them to excessive temperatures. • Detergent was put in wet drawer. >>> Dry • Detergent was put in the wrong compart- the detergent drawer before putting in de- ment.
Page 51
• Some meshed laundry such as tulle may • Spinning might not be sufficient for laun- foam too much because of their texture. dry. >>> Select a higher spin speed in the >>> Use smaller amounts of detergent for washing step of the Washer-Dryer. this type of item.
Therefore, please be advised that gistered professional repairers. On the con- repairs by professional repairers (who trary, such attempts by end-users may are not authorized by Grundig ) shall void cause safety issues and damage the the guarantee. product and subsequently cause fire, flood,...
Page 53
The manufacturer/seller cannot be held li- able in any case where end-users do not comply with the above The spare part availability of the washing machine or washer-dryer that you pur- chased is 10 years. During this period, ori- ginal spare parts will be available to oper- ate the washing machine or washer-dryer properly.
Need help?
Do you have a question about the GDP810662WW and is the answer not in the manual?
Questions and answers