Temperature Selection ....28 Table of Contents Spin Speed Selection..... 28 1 Safety Instructions......Drying Programmes....... 29 Intended Use........Washing and Drying Programmes 30 Safety of Children, Vulnerable 6.10 Programme and Consumption Persons and Pets ......Table ..........Electrical Safety......6.11 Auxiliary Function Selection..
Page 3
Please read this user manual first! Dear Customer, Thank you for choosing Grundig product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product.
1 Safety Instructions This section includes the safety • The manufacturer assumes no instructions necessary to pre- responsibility for any damage vent the risk of personal injury or due to misuse or mishandling. material damage. • This appliance is intended to be used in household and sim- Our company shall not be held ilar applications.
• Children under the age of 3 Electrical Safety should be kept away unless • Product should be unplugged continuously supervised. during installation, mainten- • Electrical products are danger- ance, cleaning and repair pro- ous for children and pets. Chil- cedures.
• When unplugging the appli- Installation Safety ance, don't hold the power • Check the information on the cord, but the plug. manual and installation in- • Make sure the plug is not wet, structions to prepare the dirty or dusty. product for installation and Handling Safety make sure the electrical mains,...
Page 7
• Place the product on a level valve should be fitted. The and hard surface and balance maximum allowed temperat- with the adjustable legs. ure is 25°C. • Connect the product to a • Fit the end of the water dis- grounding plug protected by a charge hose to the dirty water fuse suitable to the current val-...
• Make sure pets do not climb Operational Safety inside the product. Check in- • When you are using the appli- side the product before use. ances, use only detergents, • Do not force open the locked softeners and supplements loading door.
• Take the following precautions in hot water by adding extra to prevent formation of biofilm detergent before being dried in and malodours: the washing machine with dryer. Otherwise, fire hazard – Make sure the room where arises. the washing machine is •...
Page 10
laundry remains at a temperat- in the machine. The colour left ure where it will not be dam- by the leather parts may smear aged. You may be exposed to on other textiles. hot steam if you open the • If there is a problem that you cover without completing the cannot solve using the inform- cooling step.
• Do not dry large laundry such • Prevent the lint from accumu- as tulle curtains, curtains, lating around the product. sheets/beddings, blankets, Maintenance and rugs in the machine. Laundry Cleaning Safety may get damaged. • Do not wash the product with •...
2 Important Instructions for Environment 2.1 Compliance with WEEE Direct- This product complies with EU WEEE Directive (2012/19/EU). This product bears a classifica- tion symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling.
3 Technical Specifications Supplier’s name or commercial brand Grundig GWD 61400 Model name Washing capacity (cotton) (kg) Drying capacity (cotton) (kg) Maximum spin speed (cycle/min) 1600 Built-In Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet...
4 Installation 4.1 Appropriate Installation Loca- Please read the “Safety Instruc- tion tions” section first! • Place the product on a hard and level Your washing machine automatic- floor. Do not place it onto a carpet with ally detects the amount of laundry high pile or other similar surfaces.
• Cover B and the Cap are optional. If avail- WARNING able, attach cover B and the Cap. Keep the transportation safety bolts in a safe place to reuse when Cover B the product needs to be moved again in the future. Install the transportation safety bolts in reverse order of the disas- sembly procedure.
WARNING Make sure that the cold water con- nection is performed correctly dur- ing the installation of the product. Otherwise, your laundry may come out as hot at the end of the wash- ing cycle and thus they may be worn.
4.6 Adjusting the Stands • Power cable plug must be within easy reach after installation. • If the current supply to the fuse or WARNING breaker in the house is less than 16 In order to ensure that the product Amps, have a qualified electrician install operates more silently and vibra- a 16 amp supply.
5 Preliminary Preparation • Tough stains must be treated properly Please read the “Safety Instruc- before washing. If you are not sure, tions” section first check with a dry cleaner. 5.1 Sorting the Laundry • Wash trousers and delicate laundry turned inside out.
washing laundry, perform first operation in Follow the instructions in “Pro- Drum Cleaning programme. If this pro- gramme and consumption table”. gramme is not available in your product, ap- When the appliances is overloaded ply the method which is described in sec- product’s washing performance will tion "Cleaning the loading door and the drop.
Page 20
• Do not add washing chemicals (Liquid detergent, Softener, etc.) while the ma- chine is during Drying step. Choosing the Detergent type Detergent type to be used depends on the washing programme, fabric type and col- our. • Use different detergents for coloured and white laundry.
Page 21
• If the softener is not fluid, dilute with wa- • Put the tablet detergent in the main ter before placing in the softener com- washing compartment (compartment no. partment. “2”) or directly inside the drum before washing. WARNING • Tablet detergents may leave residue in Do not use liquid detergents or the detergent compartment.
• Oxygen-based decolourants can be used drawer and wait for the product to rinse together with detergents. However, if it away the detergent during water intake. does not have the same viscosity as the Add the decolourant to the same com- detergent, first place the detergent in partment while the machine continues compartment no.
starts, in 20-25 minutes actual load is de- programme duration increased automatic- tected by the machine. And if the detected ally. You can follow this change on the dis- load is higher than half load; washing pro- play. gramme will be adjusted accordingly and 6 Operating the Product Please read the “Safety Instruc- tions”...
6.4 Selection of Washing Pro- ing programmes. If you want, by keeping pressing the button you can dry for the gramme maximum time allowed. 1. Determine the programme suitable for You can take a glance at the programmes the type, quantity and soiling level of the for which you can select the drying function laundry in accordance with "Programme in the Programme and Consumption tables.
Page 27
sured with intense washing movements. If • Shirts the quick wash function is not selected, ef- This programme is used to wash the shirts fective washing and rinsing performance is made from cotton, synthetic and synthetic ensured for your heavily soiled laundry. blended fabrics altogether.
temperature value is not the maximum • Mix temperature that can be selected for the Use to wash your cotton and synthetic current programme. clothes together without sorting them. Press the Temperature Adjustment button • Lingerie to change the temperature. Temperature You can use this programme to wash delic- decreases gradually.
order to prevent your laundry from getting 6.8 Drying Programmes wrinkled when there is no water in the ma- chine. WARNING This function holds the laundry in the final The machine automatically cleans rinsing water. If you want to spin your laun- the lint that from the laundry during dry after the Rinse Hold function: drying programme.
When you will dry laundry consist- Clean and Wear programme is de- ing of towels and bathrobes only, signed to quickly wash and dry load a maximum of 4,5 kilograms daily clothes that have been worn of laundry. for a short time and are not heavily For the dry weight of the laundry, contaminated.
Refreshing with hot air (48 min. and 38 Hygienic Ventilation programme min.) does not use water. Use this pro- gramme for clothes you want to The default duration is 58 minutes if you select the “Hygienic Ventilation” pro- clean by ventilation. gramme.
Page 32
Please read Installation section of You can see the washing duration the user manual before first use. on the display of your machine The auxiliary functions in the table while selecting a programme. De- may vary according to the model of pending on the amount of laundry your machine.
0,60 1200 • • • 30-Cold Mini Wash&Dry 1,00 1200 • • • 30-Cold HygieneRefresh 0,50 • • 6.11 Auxiliary Function Selection If the selected wetness level (Iron Dry, Cupboard Dry, Cupboard Extra Dry) cannot be reached at the end of the drying programme, your ma- chine automatically extends the programme duration.
button a second time, the fast LED will light gramme. You can select and use some aux- up, the time will decrease a little and it will iliary functions even though they are not show the minimum programme duration, found on your product. You can increase which is suitable for your less soiled laun- and decrease the time of the Cotton and dry.
Page 35
To activate the child lock: This is not a washing programme. This is a maintenance programme. Press and hold the related auxiliary func- Do not turn this programme on tion button for 3 seconds. After the count- down as “3-2-1" on the display is over, Child when there is something inside the machine.
6.12 Drying Steps 6.13 End Time Time display When the end time function is selected, the remaining time until the programme starts is shown in hours such as 1h, 2h, and the remaining time to complete the programme after your programme starts is shown in hours and minutes as in the 01:30 example.
If you want to cancel the End Time func- 3. Programme follow-up indicator lights on tion, turn off and on the product by press- the display will show the current pro- ing the On/Off button. gramme step. If no programme is started or no button is pressed within 10 minutes during programme selection pro- cess, the product will automatically...
If the water level in the machine is not suit- able when you press Start/Pause button, the door lock cannot be deactivated and the door lock icon on the display remains If the temperature of the water in- side the machine is above 50°C, you cannot deactivate the door lock for safety reasons, even if the water level is suitable.
to perform various operations on the ma- It gives out an audio warning if chine. Furthermore, you can use some fea- change is not allowed. tures only with HomeWhiz function. The loading door will not open if the In order to use the Bluetooth feature of your water temperature in the machine machine, you must download HomeWhiz is high or the water level is above...
All the safety measures described in "GENERAL SAFETY INSTRUC- TIONS" section of your user manual apply to the remote opera- tion through HomeWhiz function as well 4. Follow the instructions on the display of 6.19.1 HomeWhiz Setup HomeWhiz application. In order for the application to run, a connec- 5.
6.19.3 Deleting the HomeWhiz Ac- count Match Follow the following steps in order to delete a washing machine previously matched with someone else’s account. 1. Turn on your machine by using the On/ Off button. HomeWhiz Application may require 2. When your machine is running, push and you to type the product number hold the Remote Control Function but- shown on the product label.
bluetooth connection. If the symbol is You can follow whether the Remote Control flashing, the product is trying to connect. If function is On or Off through the function the symbol is off, you have no connection. indicator on the button. If the Remote Control function is Off, all the When the bluetooth connection is operations are handled on the washing ma-...
7 Maintenance and Cleaning programme without prewash. Adjust to the Please read the “Safety Instruc- recommended temperature of the spe- tions” section first! cial washing machine drum cleaning chemical that will be obtained from au- Service life of your product extends and fre- thorised services.
We recommend you to wipe the door gas- 7.5 Draining Remaining Water and ket with a dry and clean cloth at the end of Cleaning the Pump Filter the programme. This will remove residues The filter system in your product prevents on the door gasket in your machine and solid items such as buttons, coins and fab- prevent formation of malodours.
• When the pump filter starts leaking water loosen it by turning (opposite clockwise). Fill the running water to the container you placed in front of the filter. Keep a cloth ready to clean the water that may spill. • Completely turn and remove the pump fil- ter when the water in the product leaks out.
Page 46
• Laundry quantity in the product is too • If there is no power, loading door of the little. >>> Add more laundry to the product will not open. >>> To open the product. loading door, open the pump filter cap •...
Page 47
• Timer may stop during spinning step. >>> • Excessive amount of detergent is used. Automatic unbalanced load detection >>> Use the recommended amount of de- system is activated due to the unbal- tergent appropriate for water hardness anced distribution of the laundry in the and the laundry.
Page 48
• A higher temperature was selected. >>> take this detergent during rinsing or Select the proper programme and tem- softener step. Wash and clean the drawer perature according to the type and soiling with hot water. Put the detergent in the degree of the laundry.
Page 49
• Excessive amount of detergent is used. Laundry comes off wet after the drying >>> Use only sufficient amount of deter- step. gent. • The programme selected might not be • Detergent was stored under improper suitable for the type of laundry. >>> conditions.
Page 50
and pull down the emergency handle po- sitioned at the rear side of the said cap. See Loading Door Lock [} 37] (*) The product does not switch to spinning step when the laundry is not evenly distrib- uted in the drum to prevent any damage to the product and to its surrounding environ- ment.
Page 51
This certificate is issued by DEFY APPLIANCES (PTY) LIMITED manufacturers and suppli- ers of Grundig products, hereinafter the Company, to the original purchaser only, of the ap- pliance described on the certificate and shall constitute the only warranty given in respect of this appliance.
Page 52
Before requesting service please check the trouble-shooting guide in the Operating Instruc- tions as a charge may be levied where no fault is found even though your product may still be under guarantee. Please contact the Grundig Customer help-line for service or any other queries on 0861 478634 EN / 52...