Download
Share
Print this page
Furman MP-30 Owner's Manual
  1. Manuals
  2. Brands
  3. Furman Manuals
  4. Recording Equipment
  5. MP-30
  6. Owner's manual
Furman MP-30 Owner's Manual

Furman MP-30 Owner's Manual

Miniport ac power relay
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
MP-30 MINIPORT AC POWER RELAY
MP-30
MINIPORT AC POWER RELAY
SEQUENCING /
SWITCHING

Advertisement

loading

Related Manuals for Furman MP-30

Summary of Contents for Furman MP-30

  • Page 1 MP-30 MINIPORT AC POWER RELAY MP-30 MINIPORT AC POWER RELAY SEQUENCING / SWITCHING...
  • Page 2 MP-30 MINIPORT AC POWER RELAY ABOUT THE MINIPORT-30 The Furman MINIPORT-30 Power Relay is a 30 amp, contact or switched 120 VAC outlet, with a terminal strip that allows remote control via safe, inexpensive, low voltage Class 2 wiring. The MINIPORT-30 (NRTLC pending) provides a twist lock inlet and outlet, and is housed in a heavy duty steel, 8”...
  • Page 3 MP-30 MINIPORT AC POWER RELAY MOMENTARY VS. MAINTAINED CONTACT SWITCHING An on-off switch of either kind may be used to actuate the MiniPort-30. Maintained switches, such as most toggle switches, push-on/push-off button switches stay open until the switch is engaged, and stay closed until the switch is disengaged. Momentary switches, usually push-button types, are normally open and stay closed only as long as the button is pressed.

  • Page 4: Momentary Mode

    RS-1 Remote System Control Panel is an attractively finished key switch designed for use in single-gang wall mount boxes. It can control, from one location, most Furman power products that have remote capability. Power will be available at the MiniPort-30’s AC outlet when the switch is open, and will be removed when it is closed.
  • Page 5 LED must be used to indicate the status of each. Do not connect the STATUS terminals of multiple units together. With the addition of a Furman PS-REL AC Relay to provide control, a MiniPort can be used to extend...

  • Page 6: Three-Year Limited Warranty

    (via UPS Ground) will be paid by Furman. This warranty applies only to the original owner and is not transferable. Also, it does not apply to repairs done other than by the Furman factory or Authorized Repair Stations.
  • Page 7 NOTE: All equipment being returned for repair must have a Return Authorization (R/A) Number. To get an R/A Number, please call the Furman Service Department, (707) 763-1010 ext. 120 or 121, between 8 a.m. and 5 p.m., U.S. Pacific Time.
  • Page 8 Class 2 wiring. Also available is the Furman MiniPort-15 which is similar in appearance, and functionally identical except for its 15 amp rating. Both models include an internal 12 VDC supply, and can be controlled from a remote location with maintained or momentary contact switches.