Advertisement
ELITE 15 PF OWNER'S MANUAL
startlingly fast with bass fundamentals that
shake foundations with their weight and
visceral impact. Mid and high frequencies
will bloom with sweet, non-glaring ease while
imaging improves dramatically, all the while
remaining true to your system's inherent
virtues.
Installation:
Unpacking
Before unpacking your unit, inspect the carton
for any obvious severe damage to the box and
internal protective materials. If internal damage
is likely, contact the carrier who delivered
the unit before proceeding with unpacking. If,
after unpacking, shipping damage is evident,
contact the carrier. Save all shipping and
packing materials. You may need them if
you should ever have to return the unit to the
factory for servicing.
The box should contain the Elite-15 PF unit,
detachable AC cord, rack mount kit, owner's
manual, and warranty registration card. If
anything is missing, please contact Furman
Customer Service. Fill out and return your
warranty registration card. Registration
is recommended because it can be used
to establish whether the unit is within the
warranty period should your original ownership
documents be lost, and it assists us in
informing you about upgrades or other vital
information.
Safety Information - Warnings
Please read and observe all of the safety and
operating instructions before the Elite-15 PF is
operated. Retain these instructions for future
reference.
Do not disassemble or modify in any way.
•
No user-serviceable parts inside
3
Keep away from moisture and avoid
•
excessive humidity
•
Do not allow liquids or foreign objects to
enter the unit
The Elite-15 PF should be serviced by
qualifi ed service personnel when:
The power supply cord or plug has been
•
frayed or cut.
Objects have fallen or liquid has spilled
•
into the unit.
The Elite-15 PF has been exposed to rain
•
or other moisture.
The Elite-15 PF does not appear to
•
operate normally, or exhibits a marked
change in performance.
•
The Elite-15 PF has been dropped, or the
enclosure damaged.
The Elite-15 PF requires that a safety ground
be present for proper operation. Any attempt to
operate the Elite-15 PF without a safety ground
is considered improper operation and will
invalidate the warranty.
Power Source
The power source to which the Elite-15 PF is
connected should be adequate for use at 15
Amps. The Elite-15 PF will operate with a10
Amp service outlet; however, nuisance tripping
at the circuit breaker panel may result if the
systems continuous current draw exceeds 10
Amps.
Placement
The Elite-15 PF is manufactured with four
rubber feet for placement on any table, cabinet,
shelf, or fl oor. These rubber feet may be
easily removed with a standard Philips screw
driver when rack mounting adjacent to other
Advertisement
