Table of Contents
Advertisement
Using Web-based Management
Here you can make Firewall, Internet Filter, and Web Filters adjustments for
network security.
Firewall
SPI Firewall
Protection:
Internet Filter
Filter Anonymous
Internet Requests:
Filter Multicast:
Filter Internet NAT
Redirection:
Filter IDENT
(Port113):
Web Filters
Using the Web Filters feature, you may enable up to four specific filtering
methods.
Proxy:
Java:
58
Enable or Disable Stateful Packet Inspection (SPI)
feature of the firewall. The default setting is „Enable‟.
This filter blocks anonymous internet requests from
outside network. The default setting is „disabled‟.
Multicasting allows for multiple transmissions to
specific recipients at the same time, i.e. the Router
allows IP multicast packets to be forwarded to the
appropriate computers.
To allow multicasting, disable "Filter Multicast" (this is
the default setting).
To block multicasting, enable "Filter Multicast".
This filter blocks local resource access via NAT
(Network Address Translation) redirection (i.e.
external address) from other local computers. The
default setting is „enabled‟.
This feature keeps Port 113 from being scanned by
devices outside of your local network. The default
setting is „disabled‟.
Use of WAN proxy servers may compromise the Router's
security. Select this option to disable access to any WAN
proxy servers.
Java is a programming language for websites. Select this
option to disable Java. If you disable Java, you run the
Advertisement
Table of Contents
