Table of Contents
Advertisement
Using Web-based Management
1. Name: enter an application name for this port triggering rule.
2. Protocol: click
TCP+UDP (default), TCP, UDP, or Other...
3. Triggered Range: enter the Start Port and End Port for the triggered
port number range of the Internet application (please check its
documentation for the port number(s) needed).
4. Forwarded Range: enter the Start Port and End Port for the forwarded
port number range of the Internet application (please check its
documentation for the port number(s) needed).
5. Click
to the Port Triggering list.
the status area, the message Unapplied Change may appear next to
"Operator Name" to indicate configuration changes stored in the router.
6. More rules can be added to the Port Triggering list by repeating Steps
1-5.
7. (a) To enable or disable a Port Forwards list rule, click its check box
under „Enable‟.
(b) To remove any Port Triggering rule, click its corresponding
button.
8. To edit a particular Port Triggering rule in detail, click its corresponding
and detailed than express settings in Steps 1-4) will appear. After making
56
and select a protocol from the drop down list –
. The port triggering rule you have just entered will be added
button, and the rule‟s associated configuration page (more flexible
(a)
(b)
In
Advertisement
Table of Contents
