Table of Contents
Advertisement
Using Web-based Management
1. Name: Enter an application name for this port range forwarding rule.
2. Protocol: Click
TCP+UDP (default), TCP, UDP, or Other...
3. Port Range Forward: Specify the range of port forwarding by entering
the Start Port number and the End Port number.
4. IP address: Enter the IP address of the PC running the specific
application.
5. Click
added to the Port Range Forward list.
the status area, the message Unapplied Change may appear next to
"Operator Name" to indicate configuration changes temporarily stored in
the router.
6. More rules can be added to the Port Range Forward list by repeating
Steps 0-0.
7. (a) To enable or disable a Port Forwards list rule, click its check box
under „Enable‟.
(b) To remove any Port Forwards rule, click its corresponding
button.
8. To edit a particular Port Forwards rule in detail, click its corresponding
and detailed than express settings in Steps 0-0) will appear. After making
any changes, click
configuration page.
54
and select a protocol from the drop down list –
. The port range forwarding rule you have just entered will be
button, and the rule‟s associated configuration page (more flexible
(a)
. Finally click
(b)
In
to exit this
Advertisement
Table of Contents
