Wifi - BandLuxe R558C Series User Manual

IPSec
Passthrough:
PPTP
Passthrough:
L2TP
Passthrough:

WiFi

This submenu item is for configuring all Wi-Fi-related settings. This router
supports up to two WiFi SSIDs. The default SSID is as follows:
Tab Name
"BR_LTE_xxxx"
Hexadecimal
39
IP Security (IPSec) provides authentication and
encryption. Since it is mainly a Layer 3 technology, it
can secure all data on the network. To allow IPSec
tunnels to pass through the Router, click „Enabled‟.
Point-to-Point Tunneling Protocol (PPTP) allows you
to establish a connection to an enterprise network. To
allow PPTP tunnels to pass through the Router, click
Enabled.
Layer 2 Tunneling Protocol (L2TP) is an extension of
the Point-to-Point Tunneling Protocol and is also used
to establish virtual private networks. To allow L2TP
tunnels to pass through the Router, click Enabled.
Corresponding SSID Default Password
BR_LTE_xxxx
Decimal
Digit Number
0 00
1 01
Using Web-based Management
The last 4 digits of MAC
address (xxxx) converted into
2-digit decimal numbers,
please see table below for
conversion method.
Hexadecimal Decimal
Digit Number
8
9
08
09