Sony HTG700CEK Operating Instructions Manual page 18

1
Turn on the TV.
2
Turn on the system.
3
Press and hold the BLUETOOTH
button on the bar speaker and
INPUT on the remote control
simultaneously for 5 seconds.
The system enters the pairing
mode, [PAIRING] appears in the
front panel display, and the
BLUETOOTH indicator flashes twice
repeatedly.
18
GB

INPUT
BLUETOOTH
button
4
On the TV, search the system by
performing the pairing operation.
The list of the BLUETOOTH devices
that are searched appears on the TV
screen.
For the operation method to pair
the BLUETOOTH device to the TV,
refer to the operating instructions of
the TV.
5
Pair the system and TV by
selecting "HT-G700" from the list
on the TV screen.
6
Make sure that the BLUETOOTH
indicator on the bar speaker lights
in blue and [TV-BT] appears in the
front panel display.
A connection between the system
and TV has been established.
7
Select the program or input of the
device by using the TV remote
control.
The sound of the displayed image
on the TV screen is output from the
system.
8
Adjust the volume of the system
by using the TV remote control.
When pressing the muting button
on the TV remote control, the sound
is muted temporarily.
Notes
• If the TV sound is not output from the
system, select the TV input by pressing
INPUT and check the status of the front
panel display and indicators on the bar
speaker.
– [TV-BT] appears in the front panel
display: The system and TV are
connected and TV sound is output from
the system.
– The BLUETOOTH indicator flashes twice
repeatedly and [PAIRING] appears in the
front panel display: Perform pairing on
the TV.
– [TV] appears in the front panel display:
Perform steps from the start.