Sony SRSXB23CCE7 Help Manual page 17

After you pair the speaker with a BLUETOOTH device for the first time since purchase or initialize the speaker (the
speaker has no pairing information), the speaker automatically enters pairing mode when it is turned on. Proceed to
step .
When the indicator is flashing slowly
The speaker is searching for a BLUETOOTH device.
To pair the speaker with a second or subsequent BLUETOOTH device (when the speaker has pairing
information of other BLUETOOTH devices), proceed to step
To reconnect to the BLUETOOTH device that has been registered (paired), proceed to step
will automatically be connected just by turning on the BLUETOOTH function on the smartphone/iPhone.
Depending on the BLUETOOTH device, it may be reconnected just by turning on the power to the speaker. For
details, refer to the operating instructions supplied with the BLUETOOTH device.
When the indicator stays lit
The speaker has been connected to the BLUETOOTH device.
To connect to other BLUETOOTH devices, follow one of the procedures below.
To pair the speaker with a second or subsequent BLUETOOTH device (when the speaker has pairing
information of other BLUETOOTH devices), proceed to step
To reconnect to the BLUETOOTH device that has been registered (paired), proceed to step
will automatically be connected just by turning on the BLUETOOTH function on the smartphone/iPhone.
Press the (BLUETOOTH) button.
3
You hear voice guidance (BLUETOOTH pairing) from the speaker and the
flashing (pairing mode).
.
.
(BLUETOOTH) indicator starts double
17
. The speaker
. The speaker