2E GAMING GALAXY Operation Manual page 29

EN
ARGB HUB-А:
Specification:
4 port (ARGB HUB-A) x 5 V 3 pin connector of fan.
4 port (ARGB HUB-A) x regular 3 pin connector of fan.
2 port x 3 pin connector of LED strip.
1 port x 5V 3pin connect to M/B.
1 port x SATA connect to power supply.
1 port x 2 pin connect to LED switch.
Function:
1. Manual control by pressing LED button.
2. Press LED button for 3 seconds change mode to motherboard control.
3. Press LED button for 5 seconds to turn off LED power.
4. Press LED button back to manual control by LED button.
5. Up to 4 pcs (ARGB HUB-A) of ARGB fan, 2 pcs of LED strip to be connected.
6. Random effect from the first start.
29