Advertisement
Available languages
Available languages
HDD INSTALLATION TO SPECIAL CAGE.
1 – Pull out cage (indicated in the picture) / Harddisk space on HDD cage.
2 – Push-and-Pull HDD cage. Please, prepare for HDD installation.
3 – Fix top HDD with screw from the bottom first, then fix bottom HDD and fix with screw from both sides.
4 – Push inside ( in the picture). Push the HDD cage back inside to the proper position.
VGA INSTALLATION.
1 – Expension slots on rear plate of chassis.
2 – Remove related PCI bay.
3 – Insert GPU to proper position.
4 – Fix with screw 2 (check COMPLETE SET).
1. Plug HDD LED head to the "HDD LED"/
"HD LED"/ "IED LED" pins on motherboard.
2. Plug Power LED head to the "PWR LED"
pins on motherboard.
3. Plug Power SW head to the "PWR SW"/
"PWR BTN"/ "RWR" pins on motherboard.
1
1
2
2
4. Attention: Plug "+" to "+" and "-" to "-".
28
EN
3
3
4
4
Advertisement
