Cuckoo CRP-R06 TOOL Fuzzy Series Operating Instructions Manual page 28

Controlling Method of Warming Temperature
If the temperature in the rice cooker is not set properly, an odor or the color of the rice may change even
though it is cleaned frequently and boiled up. Temperature needs to be set.
Device Temperature Control
1. When you smell bad odors and the rice is too watery: The keep warm temperature is too low. In this case, increase
the "Keep Warm" temperature by 2-3℃.
2. When the rice has a yellowish color or is too dry: The Keep Warm temp is too high. In this case decrease the "Keep
Warm" temperature by 2-3℃.
How to Operate Under CUCKOO Customized Taste Function.
Use it while opening the lid when there is too much water or rice becomes too soft.
1. If too much water is spilled out when you open the lid :
2. If the edge of rice is too soft :
28
TO KEEP COOKED RICE WARM AND TASTY
OR
OR
Press "MENU/SELECT" button to reduce the setting mode.
❶ Press "AUTO CLEAN" button for 2 seconds at standby mode to
enter voice setting mode. Press "AUTO CLEAN" 2 time to enter
the warming temperature setting mode. The display will show as
seen in the image. current keep warm temperature will show.
❷ Press "MENU/SELECT" button so that the display shifts.
❸ After setting the desired value, press "PRESSURE COOK/Glutin
Turbo" or "WARM/REHEAT" button to automatically input the set
value and entre the standby mode (if you press "CANCEL" button
or do not operate for 7 seconds, setting will be cancelled and you
will go back to standby mode.) (When you press "AUTO CLEAN"
button, you will enter the customized taste setting mode without
saving the changed value.)
❶ Press "AUTO CLEAN" button for 2 seconds at standby mode
to go to voice setting mode. Press "AUTO CLEAN" 3 times to
enter the customized Keep Warm setting mode.
❷ Press the "MENU/SELECT" button so that the display shifts.
❸ After setting the desired value, press "PRESSURE COOK/Glutin
Turbo" or "WARM/REHEAT" button to automatically input the set
value and entre the standby mode (if you press "CANCEL" button
or do not operate for 7 seconds, setting will be cancelled and you
will go back to standby mode.) (When you press "AUTO CLEAN"
button, you will enter the customized taste setting mode without
saving the changed value.)
Press "MENU/SELECT" button to raise the setting mode.